(873) 0100-GB sAttEldrEIEck
aTTaCHaBLE iMPLEMEnTs
GB
- 1 -
Optional equipment:
Hydrolift for sower with universal drive
The position of catch
hooks (80) must be
brought into line with
sower to be attached.
The universal drive of
the attached implement
is coupled to the
transmission.
After fitting sower, safety bracket (81)
must be slipped onto lifting lugs and
secured with linch pin.
Optional equipment:
Lifting limiter for Hydrolift
In order not to exceed the maximum allowable drive shaft angle
when raising the attached implement, the additional "Lifting Limiter"
unit is recommended.
Adjusting the Lifting Limiter
- Open stop valve (Position E).
- Raise attached sower to the maximum allowable drive shaft angle
using Hydrolift.
- Slip pins (85) into the next hole after the end of the limiter bar
(86).
The pins now act as buffers and consequently limit the l i f t i n g
height.
Safety device for on-road transportation
- Using the Hydrolift raise attached sower for transportation.
- Close stop valve (Position A).
In doing this the attached implement cannot sink to ground level
should the hydraulics become defective.
As an additional precaution the limiter bar (86) can be secured with
pins (85).
- Slip pins into into slot (L) on the limiter bar (86).
If this additional precaution is not desired.
- Slip pins into the last hole (X).
Note
Follow the Attachable Sower Installation and Operating Manual
also.
Alternative to the hydrolift:
Connecting parts
(only for LION 300; LION 3000; L25; L30)
The position of catch hooks (80) must
be brought into line with sower to be
attached.
The universal drive of the attached
implement is coupled to the
transmission.
After fitting sower, safety bracket (81)
must be slipped onto lifting lugs and
secured with linch pin.
td65/92/40
81
td65/92/40
81
Содержание LION 4000
Страница 20: ...20 0000 SCHMIERPLAN_873...
Страница 23: ...GB Anhang Titelblatt _BA Allgemein GB Supplement...