Pottinger LION 4000 Скачать руководство пользователя страница 11

Страница: 11 / 39

- 11 -

(874) EInsAtZ 9900-GB

OPEraTiOn

working depth adjustment

The working depth (T) is determined by the swivel range of the

attached roller.

The left and right bolts act as buffers when they are placed in

corresponding holes in the hole pattern.

For safety reasons, implement should stand on the

ground when adjustments are being made.

- Twist and remove bolts.
- Place left and right bolts in the corresponding holes and secure

by twisting.

Stripping plates

Adjusting stripper carrier is carried out by unscrewing both nuts

(11) left and right.

Check beforehand that

individual stripping plates
(10) are equidistant to the
roller.

Adjusting the Stripping
plates

- Turn roller, thereby checking

the stripper plate (10) gap.

- Loosen hexagonal screw

(SK) and correctly set
stripper plate.

- Turn roller once again and

check.

Side shields

Side shields (20) can be

screwed on at various
points.

The position should suit the

working depth.

Front deflector

Front deflector (0) height is adjustable and therefore adapts to

the respective working depth. This enables clumps to be evenly
distributed through to the following rotor.

Rear deflector

(Optional equipment)

Rear deflector (1) height is adjustable and therefore adapts to the

respective working depth.

In addition, the gap (X) can be set to the rotors.
With dry ground a small gap enables the clumps to be broken up

well. A slightly higher performance is required from the drive for
this than with a wider gap.

With damp and sticky ground the rear deflector should be set at

the highest position or removed.

Safety points

• Only operate the machine under the following conditions:

- when the front rail (30) is installed.
- when the rear rail (31) or a trailing implement (cage drum roller,

Packer roller) is attached.

- when both side shields (20) are swivelled down and the appropriate

working depth is set.

• Stay clear while engine is running.

Keep people out of the danger area where the risk of injury from

ejected foreign bodies exists.

Take particular care on stoney fields, and near streets and roads.

• Turn p.t.o. off when raising

the machine.

bsb 10

Содержание LION 4000








































Результаты поиска

Содержание LION 4000

Отзывы:

Похожие инструкции для LION 4000

Бренды по названию

Популярные бренды

Pottinger LION 4000, Руководство оператора

Результаты поиска

Содержание LION 4000

Отзывы:

Похожие инструкции для LION 4000

Бренды по названию

Популярные бренды