- 8 -
900-GB VorEInSTELLunGEn (20)
GB
ADJUSTMENTS BEFORE OPERATION
Adjustment of rotor inclination
Safety points
• Turn engine off when adjustment, service and repair
work is to be done.
• Do not work under the machine without safe
support.
Implement with slewing headstock "N"
The cog enables the darrier axles to be adjusted within a swivel
range of 10°.
1 setting = 1° alteration to rotor inclination
A lot of fodder = greater angle
Not much fodder = smaller angle
Driving on public roads:
• Observe the official regulations of your country.
• Travelling on open roads may only be carried out as described in
chapter "Transport position".
Total implement width in the working position: more than m
Total implement widht in the transport position: see Techn.
Data
• Always swing the outer rotors in before transporting.
Only in this position is the maximum permissable transport width
not exceeded.
No-one can be injured by the rotor tines in this
position.
Hydraulic lower link
- Fix the hydraulic lower link (U) in such a way that the machine
cannot swing out sideways.
Tine adjustment
Tine position can be altered
by turning the tine carrier
(80).
• Position "S1"
Standard position (ex
factory)
• Position "S2"
For use under difficult conditions, e. g. with very
dense, awkward forage. This tine position increases
the strewing action.
• Direction of rotation "R"
Be aware of this when installing tines.
TD16/96/1
80
S
1
S
2
80
TD 16/96/2
R
