- 13 -
MAINTENANCE
0700_GB-Wartung_2041
GB
Safety hints
• Turn engine off when adjustment, service and repair
work is to be done.
• Do not work under the machine without safe
support.
After the first hours of operation
- Tighten all screws.
In particular the tine connections (12 kpm), the tine bar connections
(9 kpm) and the slewing headstock connections should be
checked.
- Always keep the stipulated air pressure in the tyres.
- Grease the lubrication points in accordance with the regulation
(see lubrication schedule).
Grease the lubrication nipples with universal grease after every
20 hours of operation.
- Before leaving the machine over winter, oil all the joints well and
grease all bearings.
Intake transmission
- The intake transmission
runs in oil which must be
renewed or added to after
every year of operation:
- Pour gear lubricant oil into
the intake transmission
(see enclosure on fuel
regulation).
Quantity: 0,5 l
Changing tines
- Remove broken tine after loosening the hexagonal nut and fit new
tine.
- For correct fitting observe the direction of the rotors!
- Tighten hexagonal screw with 12 daNm (= 12 kpm).
Driveshaft
- see Supplement Driveshaft -B
Drehrichtung�
direction of rotation�
TD26/93/48�
5�
12 kpm�
8
h
FETT
