background image

- 47 -

0701_GB-ISoBUS-terminal_5543

GB

isobus - TerMinal

Loading instant: 

  Setting the load limit on the automatic scraper floor 

activation
-  Only functions with automatic loading
-  “Load  scraper  floor”  function  is  automatically 

triggered  when  the  relevant  weight  load  factor 
exceeds the set value.

-  Adjustable values: 1 – 100 (standard value 55)

 

The scraper floor lead time can be adjusted here 
-  Relieves the pressure on the dosing rollers
-  Adjustable value: 0.1 – 1 seconds (standard value 

0.7 seconds)

  Is not recommended for vehicles without dosing 

rollers

2.   Loading and unloading instants

Unloading instant: 

  Setting the load limit for the scraper floor stand still

-  Only functions with automatic unloading
-  “Unload scraper floor” function is interrupted when 

the  relevant  weight  load  factor  exceeds  the  set 
value.

-  Adjustable values: 1 – 100 (standard value 45)

3.   Scraper floor lead time for automatic unloading

Note!

The value can be 
increased for dry 

fodder.

The value can be 

reduced for moist 

fodder.

Legend:

 

  

Status is entered.

  

Status is not entered.

M: Loading moment (from torque sensor provided).
  Setting approx. 440 digits in unloaded condition. 

 

Starting from 

Start Menu

-  Press 

button 4

  With that the 

TEST Menu

 is reached

TEST menu

Содержание FARO 3500 L/D




































































































Отзывы: