GB
TransporT posITIon
0600_GB-TRANSPORTSTELLUNG_288
- -
Only transport the machine in the transport position
(H2)!
Driving on public roads
TD33/7/8
10
10
Attention!
Observe the following steps:
• Swivel the rotary units completely up (H2)
• Close stop cock
(position A)
Locking occurs hydraulically, the locking hooks (10)
are there for additional safety.
If this is not observed then under certain circumstances
the transport width can be greater than m.
021-06-01
< 3 m
a
e
TD44/4/8
ST
• Observe the official regulations of your country.
• Travelling on open roads may only be carried out as
described in chapter „Transport position“.
• Protection devices must be in proper condition.
• Before travelling bring all swivelling parts into their
correct positions and secure against dangerous
changes to position.
• Check that lighting functions before travelling.
• Important information can also be found in the
supplement of this operating manual.
