GB
HITCHING
- -
0600-GB-anBau_289
Should problems occur when disconnecting:
- Move servo-valve (ST) briefly to "lower" position (s).
Doing this will reduce any possible pressure remaining in the
connector and allows a trouble-free disconnection of the hydraulic
lines.
- Remove pull rope from tractor cabin.
- Remove pull rope (EL) from tractor cabin.
- Disconnect appliance from tractor.
Lowering the machine
The machine can be lowered both from the working
position and from the transport position.
Park machine stabily!
up to 2003 model
- Swing support stand down(5a)
- Locking pin (B)
from 2004 model
- Disengage spring loaded bolt (B)
- Swing jackstand (5a) down and lock into place
- Pull off drive shaft (GW) and rest on support.
- Close stop cock (Pos. A)
- Disconnect hydraulic lines (EW, DW) from tractor.
EW, DW = EUROTOP 771, 801, 881
EW = EUROTOP 701
a
e
TD 26/2/16
s
h
0
sT
Note:
Storing height or width can be decreased by removing tine arms
(1a).
