- 48 -
0700_GB-Wireless-Power-Control_5543
Wireless PoWer conTrol - conTrol
GB
Take Note!
The device is fitted
with a high quality
lithium-ion AC. All
standard devices
are delivered with
a fully charged
AC. If the device
is to be stored for
a long time, the
LED charge level
must show green.
186-07-02
LED status
AC charge level
green
approx. 75%...100%
orange
approx. 0%...75%
red
approx. 7%...0% (AC
charging)
Quick blinking red
approx. 1%...7% (AC
charging)
Slow blinking red
AC charging (charge level as
with red)
Slow blinking orange
AC charging (charge level as
with orange)
Slow blinking green
AC is charged
Red an green
alternate blinking
quickly
Temperature alarm (AC
temperature too high - switch
device off - contact Service)
Take note!
Charging time as
per LED status
“Quick blinking
red” to “green”
(fully charged) is
approx. 1.5 hours.
(This assumes
an interrupted
charging proce-
dure for as-new
ACs.)
1
2
3
Charging the AC
- A prerequisite for trouble-free operation is that the
terminal’s AC is sufficiently charged.
- The terminal is equipped with a micro-controller
controlled automatic loader
- The terminal (1) must be switched on for every charging
procedure
- Charging takes place during operation on the machine
via the cradle (2)
- The AC can be charged away from the machine through
the accompanying mains power pack
Charging in the terminal cradle (2):
If the terminal is sitting in the cradle switched on then it
will be charged automatically when required.
Charging through the mains power pack (3):
1. Plug mains power pack into terminal (1)
2. Plug mains power pack () into 20V wall socket
. Switch terminal (1) on
4. After 25 secs. the AC charge level will appear in the
display
5. When terminal is fully charged it automatically switches
off
The charge level display will not appear on the display
if the terminal is connected to a job calculator or PC.
AC charge level via LED
The AC operating level appears via LED at the top of
the terminal
