- 40 -
0701_GB-Power-Control_5543
GB
PoWer conTrol - oPeraTion
7. Raise pick-up
As long as the button remains pressed
- pick-up will move upward
8. Lower pick-up
Briefly press button
- pick-up moves down and remains in the float
position
- Indication on display
5. Lower pivoting drawbar
As long as the button remains pressed
- the front area of the wagon will be raised
6. Raising pivoting drawbar
As long as the button remains pressed
- the front area of the wagon will be lowered
3. Swing cutting unit in
As long as the button remains pressed
- The cutter beam moves in the feeder channel.
If the cutter assembly is not swung completely in.
- Indication on display
4. Swing cutting unit out
As long as the button remains pressed
- The cutter beam moves unpressurized out of the
feeder channel.
In case it is not possible to swing out unpressurized,
use the external cutting unit buttons.
If the cutter assembly is not swung completely out.
- Indication on display
2. Loading the scraper floor
As long as the button remains pressed
- the scraper floor moves at maximum speed
from the pick-up to the tailgate
The scraper floor will no longer move (STOP indicator):
- when the forage presses against the regula-
ting rollers (roller pressure sensor reacts for at
least 2 secs.)
- when the oil pressure switch reacts (wagon full
(Full) indicator is visible)
(can also be use to briefly switch to maximum speed
during unloading)
Note!
Scraper floor stops as well when roller pressure
sensor reacts. However still stand is not shown on the
display!
