- 10 -
0700_GB-Erstanbau_563
GB
firsT-TiMe connecTion To TracTor
Drive shaft adaption
To shorten the drive shaft see supplement-B!
Pull-off rope
(only with overrunning brake)
- For trailers with overrunning facility tie pull-off rope (1)
to the handbrake lever on tractor.
(Safeguard against breakage of trailer coupling ring or
detachment from tractor.)
A1
001-01-25
Adjusting the trailer coupling
- Extend the drawbar coupling (A) so that there is sufficient
gap between drive shaft and drawbar of attached trailer,
especially in the event of pivoting (A1).
A
001-01-26
Adjusting the hose container
- Adjust the hose container in such a way that there is
sufficient distance between the hydraulic lines and the
drawbar (A2).
To make the connection to the tractor
- After completion of the work as shown
- 2 channel plug for operation
- 7-channel plug for lighting
to the tractor.
- Check that lighting is functioning on wagon.
Important!
Before putting
the tractor into
operation check
vehicle safety
(lights, brake
unit, protective
covering, .....).
