- 2 -
537 / rÜCKWANd 9500 GB
GB
tail gate
hydraulic opening and closing of the tail gate
Nobody should be within the
swinging range of the tail gate
when opening and closing!
Do not stand underneath the
raised tail gate!
- Opening and closing is effected
hydraulically from the tractor seat.
In doing so, the locking hooks (58) are unlocked and locked
automatically.
Unloading with lowered top frame
- Lock tubular frame against raising (hook left and right into position B).
- The tail gate swings backwards when opening.
Unloading with raised top frame
- Unlock tubular frame to raise (hook left and right into
position A).
- The tail gate and the tubular frame swing all the way to
the top when opening.
Adjustments
• So that the opening and closing of the tail gate functions
properly, set the adjusting screws left and right according
to the following sequence.
- Turn the hexagonal screw (57) until the lower pipe of the
tail gate fits into the slotted plate (K).
- Set a gap (1- mm) by means of the hexagonal screw
(56).
- Slip the yoke end of the frame (G) from the pin and turn it
until the hooks (58) rest, without play, on the pipe.
- Check that all lock nuts are firmly fixed.
