0200_GB ELEK-STörUNG_511
-
22
-
GB
eleCtrohYDrauliC Comfort oPeration
Trouble shooting
Beware!
Whenever eliminating trouble it is essential
to turn off power take-off.
During all these raising and/or lowering,
turning on and off processes mind safety
distances!
Emergency handling of hydraulic valves in
case of power break down
Lowering the pick-up
• Loosen lock nut (G).
• Screw in screw (h) on valve "Y1".
• Shift servo-control (ST) on tractor to lowering or "floating" position.
Pick-up is then lowered.
• Screw out screw (h) and lock with nut (G).
Raising the pick-up
• If valve (Y5) is installed, upper control cock at rear of implement must
be shifted to position "B".
• Loosen lock nut (G).
• Screw in screw (h) on valve "Y1".
• Shift servo-control (ST) on tractor to raising position. Pick-up is then
raised.
• Screw out screw (h) and lock with nut (G).
Lowering the pivoting drawbar
• Loosen lock nut (G).
• Screw in screw (h) on valve "Y2".
• Shift servo-control (ST) on tractor to lowering or "floating" position.
Pivoting drawbar is then lowered.
• Screw out screw (h) and lock with nut (G).
Raising the pivoting drawbar
• If valve (Y5) is installed, upper control cock at rear of implement must
be shifted to position "B".
• Loosen lock nut (G).
• Screw in screw (h) on valve "Y2".
• Switch servo-control (ST) on the tractor to
lift
position and simultane-
ously set the button in position „Y5“. Pivoting drawbar is then raised.
• Screw out screw (h) and lock with nut (G).
Lowering the dry forage extension
• Lever (W) in position "DA".
• Loosen lock nut (G).
• Screw in screw (h) on valve "Y3".
• Shift servo-control (ST) on tractor to lowering or "floating" position.
Dry forage extension is then lowered.
• Screw out screw (h) and lock with nut (G).
Raising the dry forage extension
• If valve (Y5) is installed, upper control cock at rear of
implement must be shifted to position "B".
• Loosen lock nut (G).
• Screw in screw (h) on valve "Y3".
• Switch servo-control (ST) on the tractor to
lift
position and
simultaneously set the button in position „Y5“. Dry forage
extension is then raised.
• Screw out screw (h) and lock with nut (G).
Opening the tailgate
• If valve (Y5) is installed, upper control cock at rear of implement
must be shifted to position "B".
• Loosen lock nut (G).
• Screw in screw (h) on valve "Y".
• Switch servo-control (ST) on the tractor to
lift
position and
simultaneously set the button in position „Y5“. Tailgate then
opens.
• Screw out screw (h) and lock with nut (G).
Closing the tailgate
• Loosen lock nut (G).
• Screw in screw (h) on valve "Y".
• Shift servo-control (ST) on tractor to lowering or "floating" position.
Tailgate then closes.
• Screw out screw (h) and lock with nut (G).
Switching on scraper floor drive
• Set the button in position „Y“.
Maintenance
• hydraulic oil change according to tractor manual.
• Before welding on trailer disconnect all plugs from tractor and disconnect trailer.
Variation
