GB
eleCtrohYDrauliC Comfort oPeration
- 20 -
9500-GB ELEK.Hyd.KOmf. (511)
Installation and check of comfort operation
Installation
- mount supplied bracket
(13) for comfort operating
with two hexagon screws
within driver’s vision and
reach in tractor cabin.
- Insert front control panel
(1) in bracket.
Check switch-off functions
1. The scraper floor drive must be switched off.
• The press-button (1) on the control panel must not be depressed
(OFF- position).
• Likewise, the press-
button (32) in the switch
box located rear left of
the trailer must not be
depressed (OFF-posi-
tion).
Control lamp:
The control
lamp which is intergrated in the press-button (1) lights up when
either of the press-buttons (16, 32) is depressed (scraper floor drive
is switched on).
Safety tips
Please take particular care when the operating elements on the
trailer and the tractor are to be used simultaneously by more
than one person. A conscientious arrangement should be made
by those concerned before operation.
An example:
Danger of injury arises if a person stands at the rear of the trailer and
somebody in the tractor cabin activates a switching function (opening
the tailgate, switch on the driving gear, ...).
2. Operating switch
- All switches, except switch (1)
which is for the Pick-up lift, are
to be briefly switched down (B)
(switch off or lower position).
Pick-up lift
• moving the switch (1) down (B) lowers the
Pick-up.
Caution!
If the lever (43) is in the "ON" positi-
on then the loading unit and Pick-up
drive will automatically switch on
when lowering.
Therefore always stay at a safe distance if the
drive shaft is coupled to the tractor and the
p.t.o. drive is switched on.
3. Engage control valve.
- move lever (ST) to "On" position and secure.
In so doing the trailer’s control block is supplied
with oil.
- By using a switch (15, 20, …) on the control panel
the relative hydraulic function takes place.
a
