0200-GB ELEK-Hyd_511
- 17 -
GB
eleCtrohYDrauliC oPeration
Installation and check of the electrohydraulic
operation
- Mount supplied bracket
(1) for the electrohydraulic
operating with two hexagon
screws within driver’s vision
and reach in tractor cabin.
- Insert front control panel (14)
in bracket (1).
Operation
- Preselect desired function on control panel. Switch engages.
- Preselected function is engaged using servo-control (ST) on
tractor.
Note:
- If tractor is to be parked with
implement attached, electro-
hydraulic operation lever is to
be shifted into neutral position
"C".
This prevents battery
discharge.
Safety tips
Please take particular care
when the operating elements
on the trailer and the tractor
are to be used simultaneously
by more than one person. A
conscientious arrangement should be made by those
concerned before operation.
An example:
Danger of injury arises if a person stands at the rear of the trailer
and somebody in the tractor cabin activates a switching function
(opening the tailgate, switch on the driving gear, ...).
Pivoting drawbar
1. Lever on control panel in position "A".
2. Engage servo-control (ST) on tractor.
Attention! Do not engage
pivoting drawbar when implement
is standing on supporting wheel.
Taigate
1. Lever on control panel in position "D".
2. Engage servo-control (ST) on tractor.
Automatic unlocking, raising/lowering and
shutting of tailgate.
Scraper floor drive (KR)
Front operation (from the
tractor cabin)
1. Shift lever (61) to the "ON"
position.
2. Lever on control panel in neutral
position "C".
2. Engage servo-control (ST) on tractor.
Rear operation
1. First shift the lever (61) into the "OFF" position.
2. Lever on control panel in neutral pos. "C".
. Engage servo-control (ST) on tractor.
4. Switch scraper floor drive "on" or "off" with lever (61).
Pick-up
1. Lever on control panel in position "E".
2. Engage servo-control (ST) on tractor.
Raising or lowering pick-up.
In doing so loading unit operation and pick-up
are automatically switched on or off.
Dry forage extension
1. Lever on control panel in position "B".
2. Engage servo-control (ST) on tractor.
Folding extension up or back gradually.
ST-24-11-2003
KB - Kr
KR
