manualshive.com logo in svg

Potterton Paramount four, Руководство по установке, Страница: 8 / 144

Поделиться
Скачать
Potterton Paramount four Скачать руководство пользователя страница 8

Danger

Danger to life due to explosion/fire.

Do not store any explosive or easily flammable materi­

als close to the appliance.

Caution

Risk of burns!

For safety reasons, the discharge pipe from the safety 

valve must always be open so that water can escape 

during heating operation. The operating state of the 

safety valve must be checked from time to time.

1.2  Intended use

The gas condensing boilers of the Paramount four series are 

intended to be used according to DIN EN 12828 as heat 

generators in domestic water heating systems.
They conform to DIN EN 483 and 677.

1.3  Specific safety instructions

1.3.1 Liquid gas below ground level

The Paramount four complies with DIN EN 126 and DIN EN 

298 and, therefore does not need an additional disconnector 

valve for operation with liquid gas below ground level.

1.4  Liabilities

1.4.1 Manufacturer's liability

Our products are manufactured in compliance with the re­

quirements of the various Directives applicable. They are 

therefore delivered with the   marking and any documents 

necessary. In the interests of the quality of our products, we 

strive constantly to improve them. We therefore reserve the 

right to modify the specifications given in this document.
Our liability as manufacturer may not be invoked in the fol­

lowing cases:

Failure to abide by the instructions on installing the appli­

ance.

Failure to abide by the instructions on using the appliance.

Faulty or insufficient maintenance of the appliance.

1.4.2 Manufacturer’s Declaration

Meeting the protection requirements according to guideline 

2004/108/EC for electromagnetic compatibility (EMC) is only 

guaranteed when the boiler is operated according to pur­

pose.
The ambient conditions according EN 55014 must be met.

1  Safety

8

Paramount four 30 – 115 kW

7658013 - 02 - 15092016

Содержание Paramount four

















































































































































Отзывы:

Нет отзывов