Potterton Paramount five 115 Скачать руководство пользователя страница 86

Страница: 86 / 156

Operation HC2/Operation HC3/P (44/46)

When Room unit 1 or Operator unit 1 (prog.no. 40) is selected, it must be

defined under prog.no. 44 or 46 whether the heating circuits HK2 and

HK3/P are to be operated together with heating circuit 1 or independently

of heating circuit 1.

Room temperature device 1 (47)

The assignment of room unit 1 to the heating circuits can be selected

here.

Heating circuit 1 only: The room temperature is sent exclusively to

heating circuit 1.

For all assigned HCs: The room temperature is sent to the heating

circuits assigned under prog. no. 42.

Action occupancy button (48)

You can select the assignment of the presence key here.

None: Pressing the presence key has no effect on the heating circuits.

Heating circuit 1 only: The presence key only affects heating circuit 1.

For all assigned HCs: The presence key affects the heating circuits

assigned under prog. no. 42.

Readjustment room sensor (54)

The temperature display of the value transmitted by the room sensor can

be corrected here.

Software version (70)

Display of the current software version.

9.2.3

Wireless

Device list (130-138)

The state of the respective device will be displayed under programme

numbers 130 to 138.

Delete all devices (140)

The wireless connections to all units is cancelled here.

9.2.4

Time programs

General information about the time programs.

Important

Time programs 1 and 2 are always assigned to the respective

heating circuits (1 and 2) and only displayed if these heating

circuits are present and also turned on in the menu Configuration

(prog.-no. 5710 and 5715).

Time program 3 can be used for heating circuit 3, for the DHW and for the

circulation pump, depending on the setting, and is always displayed.
Time program 4 can be used for the DHW and for the circulation pump,

depending on the setting, and is always displayed.
Time program 5 is not assigned a function and can be freely used for any

application using an output QX.

Preselection (500 – 600)

Selection of weekday or day blocks. The day blocks (Mon-Sun, Mon-Fri

and Sat-Sun) assist the adjustment. The set times are only copied to the

individual weekdays and can be changed in the individual day settings as

required.
The times of the individual weekdays always determine the heating

program.

9 Settings

Paramount five 30 – 115

7703046 - 01 - 23072018

Содержание Paramount five 115





























































































































































Результаты поиска

Содержание Paramount five 115

Отзывы:

Potterton Paramount five 115, Руководство по установке, Страница: 86 / 156

Результаты поиска

Содержание Paramount five 115

Отзывы: