The POSNET TRIO ONLINE fiscal printer can be optionally
equipped with devices for wireless communication.
POSNET POLSKA S.A. as the manufacturer hereby states that
the following radio devices:
POSNET MULTIPORT 2 EX BT expansion module,
WiFi/BT TRIO adapter,
are conform with provisions of the 2014/53/EU directive. Full
text of the EU conformity declaration is available at:
http://www.posnet.com.
Full version of the manual is available at www.posnet.com.
This manual describes basic printer elements, installation of
standard controllers and connecting the printer to a computer.
Description of installation and configuration of controllers
(USB(NET)) for online connections has been described in the
Quick OnLine instruction attached to the package.
Exchanging paper
1
Press the open button so that the lid pops up.
2
Place the roll in the paper chamber. Paper's end should be placed
so that a couple of centimeters extends beyond the stalk.
3
Close the printer's lid.
Manual installation of controllers
Installation of printer's controllers ends with establishing a virtual COM
port to facilitate communication with a computer via USB. This is an
automatic process upon connecting the printer to a computer.
Installation can start by clicking with the right mouse key on the
controller's file featuring INF extension, and next selecting Install from
the menu.
Controllers are on a CD (it should be in the box with the printer) and the
most up-to-date version can be downloaded from the posnet.com
website.
Setting communication interface
Using
[UP]
/
[DOWN]
keys select from printer's menu:
„2 Konfiguracja” „2 Konfin. Połączeń” „1 Usługi PC”
„1 Interfejs PC”
- each item should be confirmed with
[OK]
.
1
2
Next, using the same keys select an interface (USB, TCP/IP).
3
If the POSNET protocol was selected specify standard of Polish
characters (Windows 1250, Latin 2 or Mazovia).
4
Confirm with
[OK]
.
The printer will restart.
1
2
3
Document version 1.2