BRX Power Injector Installation Guide
32
180-0192-001-R01
6 Regulatory Compliance and Safety
FCC Declaration of Conformance
The BRX Power Injector models comply with part 15 class A of the FCC Rules. Operation is subject to
the following two conditions (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
15 Class A Information
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates; uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Industry Canada
The BRX Power Injector models comply with ICES-003 of the Industry Canada Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired
operation.
Les produits BRX Power Injector sont conformes à la norme NMB-003 d'Industrie Canada. Leur
fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de
brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage
susceptible de provoquer un fonctionnement indésirable.
Europe - EU Declaration of Conformity
The BRX Power Injector models comply with the essential requirements of the EMC Directive
2014/30/EU and Low Voltage Directive 2014/35/EU. The following test methods have been applied in
order to prove presumption of conformity with the essential requirements of the EMC Directive
2014/30/EU and Low Voltage Directive 2014/35/EU:
CSA C22.2#60950-1: Issued: 2007/03/27 Ed: 2 (R2012) Information Technology Equipment Safety
Part 1: General Requirements; Amendment 1: 2011, Amendment 2: 2014
UL 60950-1: Issued: 2007/03/27 Ed: 2 Rev: 2014/10/14 Information Technology Equipment Safety
Part 1: General Requirements
IEC 60950-1: Issued: 2013/05/28 Ed: 2.2 Information Technology Equipment - Safety - Part 1:
General Requirements; Consolidated Edition. Ed. 2: 2005
IEC 60950-22 Issued: 2005/10/20 Ed: 1 Information Technology Equipment -Safety -Part 22:
Equipment to be Installed Outdoors
CSA 22.2 No. 60950-22-07 (R2016) Issued: 2007/04/23 Ed: 1 Information Technology Equipment -
Safety -Part 22: Equipment to be Installed Outdoors (Bi-National standard, with UL 60950-22)
UL 60950-22 Issued: 2007/04/23 Ed: 1 Information Technology Equipment -Safety -Part 22:
Equipment to be Installed Outdoors
