MX5 Manual Rev. D
15
Function Buttons
All changes will be saved to the MX-Device once you have selected this option. All
saved settings are automatically updated and implemented inside the MX-Device flash Memory.
Your screen settings will be updated to the current device settings when you click on this
button.
Selecting this option will force all the MENU settings and the device to be reset to the
factory defaults based on the hardware.
Select this option to test the Smart Card modules with SLE4428 cards. Refer to the section
following on the functions that can be tested with the utility.
This option brings up a settings dialog that allows for changing the settings of the Serial
communications between the MX Device and the computer.
Select this option if you need to generate the Setup Card Data String of the current settings.
The string will be copied to the clipboard buffer. Paste this data into track 1 of your magnetic card encoder to produce your
new Custom "Default Setup Card".
Select this option if you need to update or change the Firmware inside the Device. The
Device will automatically start to beep and Flash the LED every second to indicate the device is in Update Mode. You may
need to press the "Lookup Devices" button in order to change to the Update Menu.
Select this option to see the results of a card swipe (such as a credit card or a driver's
license card). This will open an output window below the settings area. Once the Output window is opened, you will see the
various commands and responses from the MX5 device
. This option is only available when you are using a VRS or HID
