Transport
Before transportation, it is vital that the drive is switched off and secured to ensure that it
cannot be switched on accidentally or started up by unauthorised persons.
Disconnect the machine from the mains.
▪ In addition, pull out the plug of the device.
▪ Disengage the universal joint shaft on the tractor.
– Before disengaging, turn the manual throttle to minimum.
▪ Shut down the tractor.
▪ Remove the universal joint shaft from the tractor.
When turning off the machine, always be careful of the saw blade runout until the machine
has come to a standstill.
Prior to transport
Conveyor belt (option)
▪ Move the conveyor belt to the transport position.
See ..... Conveyor belt [➙ 25]
Transportation using the pallet truck
1
2
1
Pallet truck
2
Frame
▪ Push the pallet truck completely under the frame.
▪ Lift the machine with the pallet truck and move it.
Transporting by three-point linkage on the tractor
No one is permitted to stand in the area between the tractor and the machine during the
raising or lowering process.
▪ Attach the machine to the three-point linkage and use the tractor hydraulics to raise it.
If the tractor's rear lights are obscured, a light must be fitted to the rear of the machine (e.g.
magnetic holder, clip-on light, etc.)
Due to the weight of the machine, the tractor-machine combination can become unstable.
7
7.1
7.1.1
7.2
7.3
Transport
31
