Operation
In order to ensure optimal operation of the sensor system, the machine should be run
at idling speed for at least 3 minutes.
At outdoor temperatures below 0°C, let the machine idle for approximately five minutes
to allow the hydraulic system to reach the correct operating temperature (the hydraulic pipes
will then be warm to the touch).
Controls and functions
Controls
1
2
3
1
Control lever - main control
3
Ball valve – extend conveyor belt
2
Switch bracket (EasyStop) - log
carriage
Main control
1
2
1
Log carriage - operation (on)
2
not working (excess pressure)
If you press the control lever up, the log carriage begins operating.
5
5.1
5.1.1
Operation
21
