POS-X EVO-SG1-AD Скачать руководство пользователя

Страница: 1 / 2

1234123413

YJ4600

Corded Area-Imaging Scanner

Quick Start Guide

YJ4600-QS Rev A

6/12

Note: Refer to your user’s guide for information about cleaning your

device.

For localized language versions of this document, go to

www.youjieaidc.com

Getting Started

Turn computer’s power before connecting the scanner, then

power up the computer once the scanner is fully connected.

Power Supply Assembly (if included)

Connecting the Scanner
USB:

Keyboard Wedge:

Reading Techniques

The view nder projects an aiming

beam that should be centered over the

bar code, but it can be positioned in any

direction for a good read.
Hold the scanner over the bar code,

press the button, and center the aiming

beam on the bar code.
The aiming beam is smaller when the

scanner is closer to the code and larger

when it is farther from the code. Hold

the scanner close to smaller bar codes,

and farther away from large bar codes

to get a proper read.
If the bar code is highly re ective (e.g., laminated), you may need to

tilt the scanner at an angle so the bar code can be scanned.

Standard Product Defaults

The following bar code resets all standard product default settings.

Keyboard Country

Scan the

Program Keyboard Country

bar code below, then scan

the numeric bar code(s) from

page 2

, then the

Save

bar code to

program the keyboard for your country. As a general rule, the

following characters are not supported by the scanner for countries

other than the United States:

@ | $ # { } [ ] = / ‘ \ < > ~

Note: For a complete list of country codes, see the User’s Guide for

your product at our website,

www.youjieaidc.com.

Country Code

Scan

Country Code

Scan

Brazil

Turkey F

Brazil (MS)

Turkey Q

Russian

Poland

Russian (MS)

Latin America

Russian
(Typewriter)

USA (Default)

Standard Product Defaults

Program Keyboard Country

Save

Trigger

The following bar codes will allow you to use the scanner in Manual

Trigger - Normal Mode (need to press the button to read) or

Presentation mode (the scanner is activated when it “sees” a bar

code).

Su x

If you want a carriage return after the bar code, scan the

Add CR

bar code

. To add a tab after the bar code, scan the

Add Tab

bar code. Otherwise, scan the

Remove Su

bar code to

remove the su xes.

Manual Trigger - Normal

(Default)

Presentation Mode

Add CR Su x

Remove Su x

Add Tab Su x

Add Code ID Pre to all Symbologies

Scan the following bar code if you wish to add a Code ID pre x to all

symbologies at once.

Note: For a complete list of Code IDs, see the User’s Guide for your

product at our website,

www.youjieaidc.com.

Function Code Transmit

When this selection is enabled and function codes are contained

within the scanned data, the scanner transmits the function code to

the terminal. Charts of these function codes are provided in your

User’s Guide. When the scanner is in keyboard wedge mode, the

scan code is converted to a key code before it is transmitted.

Add Code ID Pre x To All Symbologies

(Temporary)

Enable

(Default)

Disable

Programming the Interface

Scan one of the following bar codes to program your interface.

USB IBM SurePos

(USB Handheld Scanner)

Interface

Keyboard Wedge

IBM PC AT and Compatibles with

CR su x

USB Keyboard (PC)

USB IBM SurePos

(USB Tabletop Scanner)

Interface

USB Keyboard (Mac)

USB Japanese Keyboard (PC)

USB HID Bar Code Scanner

YJ4600

Corded Area-Imaging Scanner

Quick Start Guide

YJ4600-QS Rev A

6/12

Note: Refer to your user’s guide for information about cleaning your

device.

For localized language versions of this document, go to

www.youjieaidc.com

Getting Started

Turn computer’s power before connecting the scanner, then

power up the computer once the scanner is fully connected.

Power Supply Assembly (if included)

Connecting the Scanner
USB:

Keyboard Wedge:

Reading Techniques

The view nder projects an aiming

beam that should be centered over the

bar code, but it can be positioned in any

direction for a good read.
Hold the scanner over the bar code,

press the button, and center the aiming

beam on the bar code.
The aiming beam is smaller when the

scanner is closer to the code and larger

when it is farther from the code. Hold

the scanner close to smaller bar codes,

and farther away from large bar codes

to get a proper read.
If the bar code is highly re ective (e.g., laminated), you may need to

tilt the scanner at an angle so the bar code can be scanned.

Standard Product Defaults

The following bar code resets all standard product default settings.

Keyboard Country

Scan the

Program Keyboard Country

bar code below, then scan

the numeric bar code(s) from

page 2

, then the

Save

bar code to

program the keyboard for your country. As a general rule, the

following characters are not supported by the scanner for countries

other than the United States:

@ | $ # { } [ ] = / ‘ \ < > ~

Note: For a complete list of country codes, see the User’s Guide for

your product at our website,

www.youjieaidc.com.

Country Code

Scan

Country Code

Scan

Brazil

Turkey F

Brazil (MS)

Turkey Q

Russian

Poland

Russian (MS)

Latin America

Russian
(Typewriter)

USA (Default)

Standard Product Defaults

Program Keyboard Country

Save

Trigger

The following bar codes will allow you to use the scanner in Manual

Trigger - Normal Mode (need to press the button to read) or

Presentation mode (the scanner is activated when it “sees” a bar

code).

Su x

If you want a carriage return after the bar code, scan the

Add CR

bar code

. To add a tab after the bar code, scan the

Add Tab

bar code. Otherwise, scan the

Remove Su

bar code to

remove the su xes.

Manual Trigger - Normal

(Default)

Presentation Mode

Add CR Su x

Remove Su x

Add Tab Su x

Add Code ID Pre to all Symbologies

Scan the following bar code if you wish to add a Code ID pre x to all

symbologies at once.

Note: For a complete list of Code IDs, see the User’s Guide for your

product at our website,

www.youjieaidc.com.

Function Code Transmit

When this selection is enabled and function codes are contained

within the scanned data, the scanner transmits the function code to

the terminal. Charts of these function codes are provided in your

User’s Guide. When the scanner is in keyboard wedge mode, the

scan code is converted to a key code before it is transmitted.

Add Code ID Pre x To All Symbologies

(Temporary)

Enable

(Default)

Disable

Programming the Interface

Scan one of the following bar codes to program your interface.

USB IBM SurePos

(USB Handheld Scanner)

Interface

Keyboard Wedge

IBM PC AT and Compatibles with

CR su x

USB Keyboard (PC)

USB IBM SurePos

(USB Tabletop Scanner)

Interface

USB Keyboard (Mac)

USB Japanese Keyboard (PC)

USB HID Bar Code Scanner

YJ4600

Corded Area-Imaging Scanner

Quick Start Guide

YJ4600-QS Rev A

6/12

Note: Refer to your user’s guide for information about cleaning your

device.

For localized language versions of this document, go to

www.youjieaidc.com

Getting Started

Turn computer’s power before connecting the scanner, then

power up the computer once the scanner is fully connected.

Power Supply Assembly (if included)

Connecting the Scanner
USB:

Keyboard Wedge:

Reading Techniques

The view nder projects an aiming

beam that should be centered over the

bar code, but it can be positioned in any

direction for a good read.
Hold the scanner over the bar code,

press the button, and center the aiming

beam on the bar code.
The aiming beam is smaller when the

scanner is closer to the code and larger

when it is farther from the code. Hold

the scanner close to smaller bar codes,

and farther away from large bar codes

to get a proper read.
If the bar code is highly re ective (e.g., laminated), you may need to

tilt the scanner at an angle so the bar code can be scanned.

Standard Product Defaults

The following bar code resets all standard product default settings.

Keyboard Country

Scan the

Program Keyboard Country

bar code below, then scan

the numeric bar code(s) from

page 2

, then the

Save

bar code to

program the keyboard for your country. As a general rule, the

following characters are not supported by the scanner for countries

other than the United States:

@ | $ # { } [ ] = / ‘ \ < > ~

Note: For a complete list of country codes, see the User’s Guide for

your product at our website,

www.youjieaidc.com.

Country Code

Scan

Country Code

Scan

Brazil

Turkey F

Brazil (MS)

Turkey Q

Russian

Poland

Russian (MS)

Latin America

Russian
(Typewriter)

USA (Default)

Standard Product Defaults

Program Keyboard Country

Save

Trigger

The following bar codes will allow you to use the scanner in Manual

Trigger - Normal Mode (need to press the button to read) or

Presentation mode (the scanner is activated when it “sees” a bar

code).

Su x

If you want a carriage return after the bar code, scan the

Add CR

bar code

. To add a tab after the bar code, scan the

Add Tab

bar code. Otherwise, scan the

Remove Su

bar code to

remove the su xes.

Manual Trigger - Normal

(Default)

Presentation Mode

Add CR Su x

Remove Su x

Add Tab Su x

Add Code ID Pre to all Symbologies

Scan the following bar code if you wish to add a Code ID pre x to all

symbologies at once.

Note: For a complete list of Code IDs, see the User’s Guide for your

product at our website,

www.youjieaidc.com.

Function Code Transmit

When this selection is enabled and function codes are contained

within the scanned data, the scanner transmits the function code to

the terminal. Charts of these function codes are provided in your

User’s Guide. When the scanner is in keyboard wedge mode, the

scan code is converted to a key code before it is transmitted.

Add Code ID Pre x To All Symbologies

(Temporary)

Enable

(Default)

Disable

Programming the Interface

Scan one of the following bar codes to program your interface.

USB IBM SurePos

(USB Handheld Scanner)

Interface

Keyboard Wedge

IBM PC AT and Compatibles with

CR su x

USB Keyboard (PC)

USB IBM SurePos

(USB Tabletop Scanner)

Interface

USB Keyboard (Mac)

USB Japanese Keyboard (PC)

USB HID Bar Code Scanner

YJ4600

Corded Area-Imaging Scanner

Quick Start Guide

YJ4600-QS Rev A

6/12

Note: Refer to your user’s guide for information about cleaning your

device.

For localized language versions of this document, go to

www.youjieaidc.com

Getting Started

Turn computer’s power before connecting the scanner, then

power up the computer once the scanner is fully connected.

Power Supply Assembly (if included)

Connecting the Scanner
USB:

Keyboard Wedge:

Reading Techniques

The view nder projects an aiming

beam that should be centered over the

bar code, but it can be positioned in any

direction for a good read.
Hold the scanner over the bar code,

press the button, and center the aiming

beam on the bar code.
The aiming beam is smaller when the

scanner is closer to the code and larger

when it is farther from the code. Hold

the scanner close to smaller bar codes,

and farther away from large bar codes

to get a proper read.
If the bar code is highly re ective (e.g., laminated), you may need to

tilt the scanner at an angle so the bar code can be scanned.

Standard Product Defaults

The following bar code resets all standard product default settings.

Keyboard Country

Scan the

Program Keyboard Country

bar code below, then scan

the numeric bar code(s) from

page 2

, then the

Save

bar code to

program the keyboard for your country. As a general rule, the

following characters are not supported by the scanner for countries

other than the United States:

@ | $ # { } [ ] = / ‘ \ < > ~

Note: For a complete list of country codes, see the User’s Guide for

your product at our website,

www.youjieaidc.com.

Country Code

Scan

Country Code

Scan

Brazil

Turkey F

Brazil (MS)

Turkey Q

Russian

Poland

Russian (MS)

Latin America

Russian
(Typewriter)

USA (Default)

Standard Product Defaults

Program Keyboard Country

Save

Trigger

The following bar codes will allow you to use the scanner in Manual

Trigger - Normal Mode (need to press the button to read) or

Presentation mode (the scanner is activated when it “sees” a bar

code).

Su x

If you want a carriage return after the bar code, scan the

Add CR

bar code

. To add a tab after the bar code, scan the

Add Tab

bar code. Otherwise, scan the

Remove Su

bar code to

remove the su xes.

Manual Trigger - Normal

(Default)

Presentation Mode

Add CR Su x

Remove Su x

Add Tab Su x

Add Code ID Pre to all Symbologies

Scan the following bar code if you wish to add a Code ID pre x to all

symbologies at once.

Note: For a complete list of Code IDs, see the User’s Guide for your

product at our website,

www.youjieaidc.com.

Function Code Transmit

When this selection is enabled and function codes are contained

within the scanned data, the scanner transmits the function code to

the terminal. Charts of these function codes are provided in your

User’s Guide. When the scanner is in keyboard wedge mode, the

scan code is converted to a key code before it is transmitted.

Add Code ID Pre x To All Symbologies

(Temporary)

Enable

(Default)

Disable

Programming the Interface

Scan one of the following bar codes to program your interface.

USB IBM SurePos

(USB Handheld Scanner)

Interface

Keyboard Wedge

IBM PC AT and Compatibles with

CR su x

USB Keyboard (PC)

USB IBM SurePos

(USB Tabletop Scanner)

Interface

USB Keyboard (Mac)

USB Japanese Keyboard (PC)

USB HID Bar Code Scanner

YJ4600

Corded Area-Imaging Scanner

Quick Start Guide

YJ4600-QS Rev A

6/12

Note: Refer to your user’s guide for information about cleaning your

device.

For localized language versions of this document, go to

www.youjieaidc.com

Getting Started

Turn computer’s power before connecting the scanner, then

power up the computer once the scanner is fully connected.

Power Supply Assembly (if included)

Connecting the Scanner
USB:

Keyboard Wedge:

Reading Techniques

The view nder projects an aiming

beam that should be centered over the

bar code, but it can be positioned in any

direction for a good read.
Hold the scanner over the bar code,

press the button, and center the aiming

beam on the bar code.
The aiming beam is smaller when the

scanner is closer to the code and larger

when it is farther from the code. Hold

the scanner close to smaller bar codes,

and farther away from large bar codes

to get a proper read.
If the bar code is highly re ective (e.g., laminated), you may need to

tilt the scanner at an angle so the bar code can be scanned.

Standard Product Defaults

The following bar code resets all standard product default settings.

Keyboard Country

Scan the

Program Keyboard Country

bar code below, then scan

the numeric bar code(s) from

page 2

, then the

Save

bar code to

program the keyboard for your country. As a general rule, the

following characters are not supported by the scanner for countries

other than the United States:

@ | $ # { } [ ] = / ‘ \ < > ~

Note: For a complete list of country codes, see the User’s Guide for

your product at our website,

www.youjieaidc.com.

Country Code

Scan

Country Code

Scan

Brazil

Turkey F

Brazil (MS)

Turkey Q

Russian

Poland

Russian (MS)

Latin America

Russian
(Typewriter)

USA (Default)

Standard Product Defaults

Program Keyboard Country

Save

Trigger

The following bar codes will allow you to use the scanner in Manual

Trigger - Normal Mode (need to press the button to read) or

Presentation mode (the scanner is activated when it “sees” a bar

code).

Su x

If you want a carriage return after the bar code, scan the

Add CR

bar code

. To add a tab after the bar code, scan the

Add Tab

bar code. Otherwise, scan the

Remove Su

bar code to

remove the su xes.

Manual Trigger - Normal

(Default)

Presentation Mode

Add CR Su x

Remove Su x

Add Tab Su x

Add Code ID Pre to all Symbologies

Scan the following bar code if you wish to add a Code ID pre x to all

symbologies at once.

Note: For a complete list of Code IDs, see the User’s Guide for your

product at our website,

www.youjieaidc.com.

Function Code Transmit

When this selection is enabled and function codes are contained

within the scanned data, the scanner transmits the function code to

the terminal. Charts of these function codes are provided in your

User’s Guide. When the scanner is in keyboard wedge mode, the

scan code is converted to a key code before it is transmitted.

Add Code ID Pre x To All Symbologies

(Temporary)

Enable

(Default)

Disable

Programming the Interface

Scan one of the following bar codes to program your interface.

USB IBM SurePos

(USB Handheld Scanner)

Interface

Keyboard Wedge

IBM PC AT and Compatibles with

CR su x

USB Keyboard (PC)

USB IBM SurePos

(USB Tabletop Scanner)

Interface

USB Keyboard (Mac)

USB Japanese Keyboard (PC)

USB HID Bar Code Scanner

YJ4600

Corded Area-Imaging Scanner

Quick Start Guide

YJ4600-QS Rev A

6/12

Note: Refer to your user’s guide for information about cleaning your

device.

For localized language versions of this document, go to

www.youjieaidc.com

Getting Started

Turn computer’s power before connecting the scanner, then

power up the computer once the scanner is fully connected.

Power Supply Assembly (if included)

Connecting the Scanner
USB:

Keyboard Wedge:

Reading Techniques

The view nder projects an aiming

beam that should be centered over the

bar code, but it can be positioned in any

direction for a good read.
Hold the scanner over the bar code,

press the button, and center the aiming

beam on the bar code.
The aiming beam is smaller when the

scanner is closer to the code and larger

when it is farther from the code. Hold

the scanner close to smaller bar codes,

and farther away from large bar codes

to get a proper read.
If the bar code is highly re ective (e.g., laminated), you may need to

tilt the scanner at an angle so the bar code can be scanned.

Standard Product Defaults

The following bar code resets all standard product default settings.

Keyboard Country

Scan the

Program Keyboard Country

bar code below, then scan

the numeric bar code(s) from

page 2

, then the

Save

bar code to

program the keyboard for your country. As a general rule, the

following characters are not supported by the scanner for countries

other than the United States:

@ | $ # { } [ ] = / ‘ \ < > ~

Note: For a complete list of country codes, see the User’s Guide for

your product at our website,

www.youjieaidc.com.

Country Code

Scan

Country Code

Scan

Brazil

Turkey F

Brazil (MS)

Turkey Q

Russian

Poland

Russian (MS)

Latin America

Russian
(Typewriter)

USA (Default)

Standard Product Defaults

Program Keyboard Country

Save

Trigger

The following bar codes will allow you to use the scanner in Manual

Trigger - Normal Mode (need to press the button to read) or

Presentation mode (the scanner is activated when it “sees” a bar

code).

Su x

If you want a carriage return after the bar code, scan the

Add CR

bar code

. To add a tab after the bar code, scan the

Add Tab

bar code. Otherwise, scan the

Remove Su

bar code to

remove the su xes.

Manual Trigger - Normal

(Default)

Presentation Mode

Add CR Su x

Remove Su x

Add Tab Su x

Add Code ID Pre to all Symbologies

Scan the following bar code if you wish to add a Code ID pre x to all

symbologies at once.

Note: For a complete list of Code IDs, see the User’s Guide for your

product at our website,

www.youjieaidc.com.

Function Code Transmit

When this selection is enabled and function codes are contained

within the scanned data, the scanner transmits the function code to

the terminal. Charts of these function codes are provided in your

User’s Guide. When the scanner is in keyboard wedge mode, the

scan code is converted to a key code before it is transmitted.

Add Code ID Pre x To All Symbologies

(Temporary)

Enable

(Default)

Disable

Programming the Interface

Scan one of the following bar codes to program your interface.

USB IBM SurePos

(USB Handheld Scanner)

Interface

Keyboard Wedge

IBM PC AT and Compatibles with

CR su x

USB Keyboard (PC)

USB IBM SurePos

(USB Tabletop Scanner)

Interface

USB Keyboard (Mac)

USB Japanese Keyboard (PC)

USB HID Bar Code Scanner

YJ4600

Corded Area-Imaging Scanner

Quick Start Guide

YJ4600-QS Rev A

6/12

Note: Refer to your user’s guide for information about cleaning your

device.

For localized language versions of this document, go to

www.youjieaidc.com

Getting Started

Turn computer’s power before connecting the scanner, then

power up the computer once the scanner is fully connected.

Power Supply Assembly (if included)

Connecting the Scanner
USB:

Keyboard Wedge:

Reading Techniques

The view nder projects an aiming

beam that should be centered over the

bar code, but it can be positioned in any

direction for a good read.
Hold the scanner over the bar code,

press the button, and center the aiming

beam on the bar code.
The aiming beam is smaller when the

scanner is closer to the code and larger

when it is farther from the code. Hold

the scanner close to smaller bar codes,

and farther away from large bar codes

to get a proper read.
If the bar code is highly re ective (e.g., laminated), you may need to

tilt the scanner at an angle so the bar code can be scanned.

Standard Product Defaults

The following bar code resets all standard product default settings.

Keyboard Country

Scan the

Program Keyboard Country

bar code below, then scan

the numeric bar code(s) from

page 2

, then the

Save

bar code to

program the keyboard for your country. As a general rule, the

following characters are not supported by the scanner for countries

other than the United States:

@ | $ # { } [ ] = / ‘ \ < > ~

Note: For a complete list of country codes, see the User’s Guide for

your product at our website,

www.youjieaidc.com.

Country Code

Scan

Country Code

Scan

Brazil

Turkey F

Brazil (MS)

Turkey Q

Russian

Poland

Russian (MS)

Latin America

Russian
(Typewriter)

USA (Default)

Standard Product Defaults

Program Keyboard Country

Save

Trigger

The following bar codes will allow you to use the scanner in Manual

Trigger - Normal Mode (need to press the button to read) or

Presentation mode (the scanner is activated when it “sees” a bar

code).

Su x

If you want a carriage return after the bar code, scan the

Add CR

bar code

. To add a tab after the bar code, scan the

Add Tab

bar code. Otherwise, scan the

Remove Su

bar code to

remove the su xes.

Manual Trigger - Normal

(Default)

Presentation Mode

Add CR Su x

Remove Su x

Add Tab Su x

Add Code ID Pre to all Symbologies

Scan the following bar code if you wish to add a Code ID pre x to all

symbologies at once.

Note: For a complete list of Code IDs, see the User’s Guide for your

product at our website,

www.youjieaidc.com.

Function Code Transmit

When this selection is enabled and function codes are contained

within the scanned data, the scanner transmits the function code to

the terminal. Charts of these function codes are provided in your

User’s Guide. When the scanner is in keyboard wedge mode, the

scan code is converted to a key code before it is transmitted.

Add Code ID Pre x To All Symbologies

(Temporary)

Enable

(Default)

Disable

Programming the Interface

Scan one of the following bar codes to program your interface.

USB IBM SurePos

(USB Handheld Scanner)

Interface

Keyboard Wedge

IBM PC AT and Compatibles with

CR su x

USB Keyboard (PC)

USB IBM SurePos

(USB Tabletop Scanner)

Interface

USB Keyboard (Mac)

USB Japanese Keyboard (PC)

USB HID Bar Code Scanner

YJ4600

Corded Area-Imaging Scanner

Quick Start Guide

YJ4600-QS Rev A

6/12

Note: Refer to your user’s guide for information about cleaning your

device.

For localized language versions of this document, go to

www.youjieaidc.com

Getting Started

Turn computer’s power before connecting the scanner, then

power up the computer once the scanner is fully connected.

Power Supply Assembly (if included)

Connecting the Scanner
USB:

Keyboard Wedge:

Reading Techniques

The view nder projects an aiming

beam that should be centered over the

bar code, but it can be positioned in any

direction for a good read.
Hold the scanner over the bar code,

press the button, and center the aiming

beam on the bar code.
The aiming beam is smaller when the

scanner is closer to the code and larger

when it is farther from the code. Hold

the scanner close to smaller bar codes,

and farther away from large bar codes

to get a proper read.
If the bar code is highly re ective (e.g., laminated), you may need to

tilt the scanner at an angle so the bar code can be scanned.

Standard Product Defaults

The following bar code resets all standard product default settings.

Keyboard Country

Scan the

Program Keyboard Country

bar code below, then scan

the numeric bar code(s) from

page 2

, then the

Save

bar code to

program the keyboard for your country. As a general rule, the

following characters are not supported by the scanner for countries

other than the United States:

@ | $ # { } [ ] = / ‘ \ < > ~

Note: For a complete list of country codes, see the User’s Guide for

your product at our website,

www.youjieaidc.com.

Country Code

Scan

Country Code

Scan

Brazil

Turkey F

Brazil (MS)

Turkey Q

Russian

Poland

Russian (MS)

Latin America

Russian
(Typewriter)

USA (Default)

Standard Product Defaults

Program Keyboard Country

Save

Trigger

The following bar codes will allow you to use the scanner in Manual

Trigger - Normal Mode (need to press the button to read) or

Presentation mode (the scanner is activated when it “sees” a bar

code).

Su x

If you want a carriage return after the bar code, scan the

Add CR

bar code

. To add a tab after the bar code, scan the

Add Tab

bar code. Otherwise, scan the

Remove Su

bar code to

remove the su xes.

Manual Trigger - Normal

(Default)

Presentation Mode

Add CR Su x

Remove Su x

Add Tab Su x

Add Code ID Pre to all Symbologies

Scan the following bar code if you wish to add a Code ID pre x to all

symbologies at once.

Note: For a complete list of Code IDs, see the User’s Guide for your

product at our website,

www.youjieaidc.com.

Function Code Transmit

When this selection is enabled and function codes are contained

within the scanned data, the scanner transmits the function code to

the terminal. Charts of these function codes are provided in your

User’s Guide. When the scanner is in keyboard wedge mode, the

scan code is converted to a key code before it is transmitted.

Add Code ID Pre x To All Symbologies

(Temporary)

Enable

(Default)

Disable

Programming the Interface

Scan one of the following bar codes to program your interface.

USB IBM SurePos

(USB Handheld Scanner)

Interface

Keyboard Wedge

IBM PC AT and Compatibles with

CR su x

USB Keyboard (PC)

USB IBM SurePos

(USB Tabletop Scanner)

Interface

USB Keyboard (Mac)

USB Japanese Keyboard (PC)

USB HID Bar Code Scanner

YJ4600

Corded Area-Imaging Scanner

Quick Start Guide

YJ4600-QS Rev A

6/12

Note: Refer to your user’s guide for information about cleaning your

device.

For localized language versions of this document, go to

www.youjieaidc.com

Getting Started

Turn computer’s power before connecting the scanner, then

power up the computer once the scanner is fully connected.

Power Supply Assembly (if included)

Connecting the Scanner
USB:

Keyboard Wedge:

Reading Techniques

The view nder projects an aiming

beam that should be centered over the

bar code, but it can be positioned in any

direction for a good read.
Hold the scanner over the bar code,

press the button, and center the aiming

beam on the bar code.
The aiming beam is smaller when the

scanner is closer to the code and larger

when it is farther from the code. Hold

the scanner close to smaller bar codes,

and farther away from large bar codes

to get a proper read.
If the bar code is highly re ective (e.g., laminated), you may need to

tilt the scanner at an angle so the bar code can be scanned.

Standard Product Defaults

The following bar code resets all standard product default settings.

Keyboard Country

Scan the

Program Keyboard Country

bar code below, then scan

the numeric bar code(s) from

page 2

, then the

Save

bar code to

program the keyboard for your country. As a general rule, the

following characters are not supported by the scanner for countries

other than the United States:

@ | $ # { } [ ] = / ‘ \ < > ~

Note: For a complete list of country codes, see the User’s Guide for

your product at our website,

www.youjieaidc.com.

Country Code

Scan

Country Code

Scan

Brazil

Turkey F

Brazil (MS)

Turkey Q

Russian

Poland

Russian (MS)

Latin America

Russian
(Typewriter)

USA (Default)

Standard Product Defaults

Program Keyboard Country

Save

Trigger

The following bar codes will allow you to use the scanner in Manual

Trigger - Normal Mode (need to press the button to read) or

Presentation mode (the scanner is activated when it “sees” a bar

code).

Su x

If you want a carriage return after the bar code, scan the

Add CR

bar code

. To add a tab after the bar code, scan the

Add Tab

bar code. Otherwise, scan the

Remove Su

bar code to

remove the su xes.

Manual Trigger - Normal

(Default)

Presentation Mode

Add CR Su x

Remove Su x

Add Tab Su x

Add Code ID Pre to all Symbologies

Scan the following bar code if you wish to add a Code ID pre x to all

symbologies at once.

Note: For a complete list of Code IDs, see the User’s Guide for your

product at our website,

www.youjieaidc.com.

Function Code Transmit

When this selection is enabled and function codes are contained

within the scanned data, the scanner transmits the function code to

the terminal. Charts of these function codes are provided in your

User’s Guide. When the scanner is in keyboard wedge mode, the

scan code is converted to a key code before it is transmitted.

Add Code ID Pre x To All Symbologies

(Temporary)

Enable

(Default)

Disable

Programming the Interface

Scan one of the following bar codes to program your interface.

USB IBM SurePos

(USB Handheld Scanner)

Interface

Keyboard Wedge

IBM PC AT and Compatibles with

CR su x

USB Keyboard (PC)

USB IBM SurePos

(USB Tabletop Scanner)

Interface

USB Keyboard (Mac)

USB Japanese Keyboard (PC)

USB HID Bar Code Scanner

YJ4600

Corded Area-Imaging Scanner

Quick Start Guide

YJ4600-QS Rev A

6/12

Note: Refer to your user’s guide for information about cleaning your

device.

For localized language versions of this document, go to

www.youjieaidc.com

Getting Started

Turn computer’s power before connecting the scanner, then

power up the computer once the scanner is fully connected.

Power Supply Assembly (if included)

Connecting the Scanner
USB:

Keyboard Wedge:

Reading Techniques

The view nder projects an aiming

beam that should be centered over the

bar code, but it can be positioned in any

direction for a good read.
Hold the scanner over the bar code,

press the button, and center the aiming

beam on the bar code.
The aiming beam is smaller when the

scanner is closer to the code and larger

when it is farther from the code. Hold

the scanner close to smaller bar codes,

and farther away from large bar codes

to get a proper read.
If the bar code is highly re ective (e.g., laminated), you may need to

tilt the scanner at an angle so the bar code can be scanned.

Standard Product Defaults

The following bar code resets all standard product default settings.

Keyboard Country

Scan the

Program Keyboard Country

bar code below, then scan

the numeric bar code(s) from

page 2

, then the

Save

bar code to

program the keyboard for your country. As a general rule, the

following characters are not supported by the scanner for countries

other than the United States:

@ | $ # { } [ ] = / ‘ \ < > ~

Note: For a complete list of country codes, see the User’s Guide for

your product at our website,

www.youjieaidc.com.

Country Code

Scan

Country Code

Scan

Brazil

Turkey F

Brazil (MS)

Turkey Q

Russian

Poland

Russian (MS)

Latin America

Russian
(Typewriter)

USA (Default)

Standard Product Defaults

Program Keyboard Country

Save

Trigger

The following bar codes will allow you to use the scanner in Manual

Trigger - Normal Mode (need to press the button to read) or

Presentation mode (the scanner is activated when it “sees” a bar

code).

Su x

If you want a carriage return after the bar code, scan the

Add CR

bar code

. To add a tab after the bar code, scan the

Add Tab

bar code. Otherwise, scan the

Remove Su

bar code to

remove the su xes.

Manual Trigger - Normal

(Default)

Presentation Mode

Add CR Su x

Remove Su x

Add Tab Su x

Add Code ID Pre to all Symbologies

Scan the following bar code if you wish to add a Code ID pre x to all

symbologies at once.

Note: For a complete list of Code IDs, see the User’s Guide for your

product at our website,

www.youjieaidc.com.

Function Code Transmit

When this selection is enabled and function codes are contained

within the scanned data, the scanner transmits the function code to

the terminal. Charts of these function codes are provided in your

User’s Guide. When the scanner is in keyboard wedge mode, the

scan code is converted to a key code before it is transmitted.

Add Code ID Pre x To All Symbologies

(Temporary)

Enable

(Default)

Disable

Programming the Interface

Scan one of the following bar codes to program your interface.

USB IBM SurePos

(USB Handheld Scanner)

Interface

Keyboard Wedge

IBM PC AT and Compatibles with

CR su x

USB Keyboard (PC)

USB IBM SurePos

(USB Tabletop Scanner)

Interface

USB Keyboard (Mac)

USB Japanese Keyboard (PC)

USB HID Bar Code Scanner

YJ4600

Corded Area-Imaging Scanner

Quick Start Guide

YJ4600-QS Rev A

6/12

Note: Refer to your user’s guide for information about cleaning your

device.

For localized language versions of this document, go to

www.youjieaidc.com

Getting Started

Turn computer’s power before connecting the scanner, then

power up the computer once the scanner is fully connected.

Power Supply Assembly (if included)

Connecting the Scanner
USB:

Keyboard Wedge:

Reading Techniques

The view nder projects an aiming

beam that should be centered over the

bar code, but it can be positioned in any

direction for a good read.
Hold the scanner over the bar code,

press the button, and center the aiming

beam on the bar code.
The aiming beam is smaller when the

scanner is closer to the code and larger

when it is farther from the code. Hold

the scanner close to smaller bar codes,

and farther away from large bar codes

to get a proper read.
If the bar code is highly re ective (e.g., laminated), you may need to

tilt the scanner at an angle so the bar code can be scanned.

Standard Product Defaults

The following bar code resets all standard product default settings.

Keyboard Country

Scan the

Program Keyboard Country

bar code below, then scan

the numeric bar code(s) from

page 2

, then the

Save

bar code to

program the keyboard for your country. As a general rule, the

following characters are not supported by the scanner for countries

other than the United States:

@ | $ # { } [ ] = / ‘ \ < > ~

Note: For a complete list of country codes, see the User’s Guide for

your product at our website,

www.youjieaidc.com.

Country Code

Scan

Country Code

Scan

Brazil

Turkey F

Brazil (MS)

Turkey Q

Russian

Poland

Russian (MS)

Latin America

Russian
(Typewriter)

USA (Default)

Standard Product Defaults

Program Keyboard Country

Save

Trigger

The following bar codes will allow you to use the scanner in Manual

Trigger - Normal Mode (need to press the button to read) or

Presentation mode (the scanner is activated when it “sees” a bar

code).

Su x

If you want a carriage return after the bar code, scan the

Add CR

bar code

. To add a tab after the bar code, scan the

Add Tab

bar code. Otherwise, scan the

Remove Su

bar code to

remove the su xes.

Manual Trigger - Normal

(Default)

Presentation Mode

Add CR Su x

Remove Su x

Add Tab Su x

Add Code ID Pre to all Symbologies

Scan the following bar code if you wish to add a Code ID pre x to all

symbologies at once.

Note: For a complete list of Code IDs, see the User’s Guide for your

product at our website,

www.youjieaidc.com.

Function Code Transmit

When this selection is enabled and function codes are contained

within the scanned data, the scanner transmits the function code to

the terminal. Charts of these function codes are provided in your

User’s Guide. When the scanner is in keyboard wedge mode, the

scan code is converted to a key code before it is transmitted.

Add Code ID Pre x To All Symbologies

(Temporary)

Enable

(Default)

Disable

Programming the Interface

Scan one of the following bar codes to program your interface.

USB IBM SurePos

(USB Handheld Scanner)

Interface

Keyboard Wedge

IBM PC AT and Compatibles with

CR su x

USB Keyboard (PC)

USB IBM SurePos

(USB Tabletop Scanner)

Interface

USB Keyboard (Mac)

USB Japanese Keyboard (PC)

USB HID Bar Code Scanner

YJ4600

Corded Area-Imaging Scanner

Quick Start Guide

YJ4600-QS Rev A

6/12

Note: Refer to your user’s guide for information about cleaning your

device.

For localized language versions of this document, go to

www.youjieaidc.com

Getting Started

Turn computer’s power before connecting the scanner, then

power up the computer once the scanner is fully connected.

Power Supply Assembly (if included)

Connecting the Scanner
USB:

Keyboard Wedge:

Reading Techniques

The view nder projects an aiming

beam that should be centered over the

bar code, but it can be positioned in any

direction for a good read.
Hold the scanner over the bar code,

press the button, and center the aiming

beam on the bar code.
The aiming beam is smaller when the

scanner is closer to the code and larger

when it is farther from the code. Hold

the scanner close to smaller bar codes,

and farther away from large bar codes

to get a proper read.
If the bar code is highly re ective (e.g., laminated), you may need to

tilt the scanner at an angle so the bar code can be scanned.

Standard Product Defaults

The following bar code resets all standard product default settings.

Keyboard Country

Scan the

Program Keyboard Country

bar code below, then scan

the numeric bar code(s) from

page 2

, then the

Save

bar code to

program the keyboard for your country. As a general rule, the

following characters are not supported by the scanner for countries

other than the United States:

@ | $ # { } [ ] = / ‘ \ < > ~

Note: For a complete list of country codes, see the User’s Guide for

your product at our website,

www.youjieaidc.com.

Country Code

Scan

Country Code

Scan

Brazil

Turkey F

Brazil (MS)

Turkey Q

Russian

Poland

Russian (MS)

Latin America

Russian
(Typewriter)

USA (Default)

Standard Product Defaults

Program Keyboard Country

Save

Trigger

The following bar codes will allow you to use the scanner in Manual

Trigger - Normal Mode (need to press the button to read) or

Presentation mode (the scanner is activated when it “sees” a bar

code).

Su x

If you want a carriage return after the bar code, scan the

Add CR

bar code

. To add a tab after the bar code, scan the

Add Tab

bar code. Otherwise, scan the

Remove Su

bar code to

remove the su xes.

Manual Trigger - Normal

(Default)

Presentation Mode

Add CR Su x

Remove Su x

Add Tab Su x

Add Code ID Pre to all Symbologies

Scan the following bar code if you wish to add a Code ID pre x to all

symbologies at once.

Note: For a complete list of Code IDs, see the User’s Guide for your

product at our website,

www.youjieaidc.com.

Function Code Transmit

When this selection is enabled and function codes are contained

within the scanned data, the scanner transmits the function code to

the terminal. Charts of these function codes are provided in your

User’s Guide. When the scanner is in keyboard wedge mode, the

scan code is converted to a key code before it is transmitted.

Add Code ID Pre x To All Symbologies

(Temporary)

Enable

(Default)

Disable

Programming the Interface

Scan one of the following bar codes to program your interface.

USB IBM SurePos

(USB Handheld Scanner)

Interface

Keyboard Wedge

IBM PC AT and Compatibles with

CR su x

USB Keyboard (PC)

USB IBM SurePos

(USB Tabletop Scanner)

Interface

USB Keyboard (Mac)

USB Japanese Keyboard (PC)

USB HID Bar Code Scanner

YJ4600

Corded Area-Imaging Scanner

Quick Start Guide

YJ4600-QS Rev A

6/12

Note: Refer to your user’s guide for information about cleaning your

device.

For localized language versions of this document, go to

www.youjieaidc.com

Getting Started

Turn computer’s power before connecting the scanner, then

power up the computer once the scanner is fully connected.

Power Supply Assembly (if included)

Connecting the Scanner
USB:

Keyboard Wedge:

Reading Techniques

The view nder projects an aiming

beam that should be centered over the

bar code, but it can be positioned in any

direction for a good read.
Hold the scanner over the bar code,

press the button, and center the aiming

beam on the bar code.
The aiming beam is smaller when the

scanner is closer to the code and larger

when it is farther from the code. Hold

the scanner close to smaller bar codes,

and farther away from large bar codes

to get a proper read.
If the bar code is highly re ective (e.g., laminated), you may need to

tilt the scanner at an angle so the bar code can be scanned.

Standard Product Defaults

The following bar code resets all standard product default settings.

Keyboard Country

Scan the

Program Keyboard Country

bar code below, then scan

the numeric bar code(s) from

page 2

, then the

Save

bar code to

program the keyboard for your country. As a general rule, the

following characters are not supported by the scanner for countries

other than the United States:

@ | $ # { } [ ] = / ‘ \ < > ~

Note: For a complete list of country codes, see the User’s Guide for

your product at our website,

www.youjieaidc.com.

Country Code

Scan

Country Code

Scan

Brazil

Turkey F

Brazil (MS)

Turkey Q

Russian

Poland

Russian (MS)

Latin America

Russian
(Typewriter)

USA (Default)

Standard Product Defaults

Program Keyboard Country

Save

Trigger

The following bar codes will allow you to use the scanner in Manual

Trigger - Normal Mode (need to press the button to read) or

Presentation mode (the scanner is activated when it “sees” a bar

code).

Su x

If you want a carriage return after the bar code, scan the

Add CR

bar code

. To add a tab after the bar code, scan the

Add Tab

bar code. Otherwise, scan the

Remove Su

bar code to

remove the su xes.

Manual Trigger - Normal

(Default)

Presentation Mode

Add CR Su x

Remove Su x

Add Tab Su x

Add Code ID Pre to all Symbologies

Scan the following bar code if you wish to add a Code ID pre x to all

symbologies at once.

Note: For a complete list of Code IDs, see the User’s Guide for your

product at our website,

www.youjieaidc.com.

Function Code Transmit

When this selection is enabled and function codes are contained

within the scanned data, the scanner transmits the function code to

the terminal. Charts of these function codes are provided in your

User’s Guide. When the scanner is in keyboard wedge mode, the

scan code is converted to a key code before it is transmitted.

Add Code ID Pre x To All Symbologies

(Temporary)

Enable

(Default)

Disable

Programming the Interface

Scan one of the following bar codes to program your interface.

USB IBM SurePos

(USB Handheld Scanner)

Interface

Keyboard Wedge

IBM PC AT and Compatibles with

CR su x

USB Keyboard (PC)

USB IBM SurePos

(USB Tabletop Scanner)

Interface

USB Keyboard (Mac)

USB Japanese Keyboard (PC)

USB HID Bar Code Scanner

Mobile Phone Read Mode

When this mode is selected, your scanner is optimized to read bar

codes from mobile phone or other LED displays. However, the speed

of scanning printed bar codes may be slightly lower when this mode

is enabled.

Note: To turn Mobile Phone Read Mode, scan the Manual

Trigger - Normal bar code on the previous page.

Hand Held Scanning - Mobile

Phone

Presentation Scanning - Mobile

Phone

Data Format Editor Instructions

The following are abbreviated instructions for entering a data format.

For complete instructions refer to your User’s Guide, available at our

website,

www.youjieaidc.com.

1. Scan the

Enter Data Format

symbol.

2. Primary/Alternate Format: scan

for Primary Format

3. Terminal Type: scan

099

for any terminal type

4. Code I.D.: scan

for any bar code type

5. Length: scan

9999

for any length bar code.

6. Editor commands: use the Programming Chart that follows.
7. Scan

Save

to save your entries.

Enter Data Format

Clear All Data Formats

Save

Programming Chart

Save

Technical Assistance

Contact information for technical support, product service, and repair

can be found at

www.youjieaidc.com

User Documentation

For localized versions of this document, and to download the User’s

Guide, go to

www.youjieaidc.com

Disclaimer

Youjie reserves the right to make changes in speci

tions and other

information contained in this docum ent without prior notice, and the reader

should in all cases consult Youjie to determine whether any such changes

have been made. The information in this publication does not represent a

commitment on the part of Youjie.

Youjie shall not be liable for technical or editorial errors or omissions

contained herein; nor for incidental or consequential damages resulting from

the furnishing, performance, or use of this material.

This document contains proprietary informa tion that is protected by copyright.

All rights are reserved. No part of this document may be photocopied,

reproduced, or translated into anot her language without the prior written

consent of Youjie.

Web Address:

www.youjieaidc.com

Limited Warranty

Youjie warrants its products to be free from defects in materials and

workmanship and to conform to Youjie’s published speci cations

applicable to the products purchased at the time of shipment. This

warranty does not cover any Youjie product which is (i) improperly

installed or used; (ii) damaged by accident or negligence, including

failure to follow the proper maintenance, service, and cleaning

schedule; or (iii) damaged as a result of (A) modi cation or alteration

by the purchaser or other party, (B) excessive voltage or current

supplied to or drawn from the interface connections, (C) static elec-

tricity or electro-static discharge, (D) operation under conditions

beyond the speci ed operating parameters, or (E) repair or service

of the product by anyone other than Youjie or its authorized repre-

sentatives.

This warranty shall extend from the time of shipment for the duration

published by Youjie for the product at the time of purchase ("War-

ranty Period"). Any defective product must be returned (at pur-

chaser’s expense) during the Warranty Period to Youjie factory or

authorized service center for inspection. No product will be

accepted by Youjie without a Return Materials Authorization, which

may be obtained by contacting Youjie. In the event that the product

is returned to Youjie or its authorized service center within the War-

ranty Period and Youjie determines to its satisfaction that the prod-

uct is defective due to defects in materials or workmanship,Youjie, at

its sole option, will either repair or replace the product without

charge, except for return shipping to Youjie.
EXCEPT AS MAY BE OTHERWISE PROVIDED BY APPLICABLE

LAW, THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER

COVENANTS OR WARRANTIES, EITHER EXPRESSED OR

IMPLIED, ORAL OR WRITTEN, INCLUDING, WITHOUT LIMITA-

TION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGE-

MENT.
YOUJIE’S RESPONSIBILITY AND PURCHASER’S EXCLUSIVE

REMEDY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR

OR REPLACEMENT OF THE DEFECTIVE PRODUCT WITH NEW

OR REFURBISHED PARTS. IN NO EVENT SHALL YOUJIE BE

LIABLE FOR INDIRECT, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES, AND, IN NO EVENT, SHALL ANY LIABILITY OF YOU-

JIE ARISING IN CONNECTION WITH ANY PRODUCT SOLD

HEREUNDER (WHETHER SUCH LIABILITY ARISES FROM A

CLAIM BASED ON CONTRACT, WARRANTY, TORT, OR OTHER-

WISE) EXCEED THE ACTUAL AMOUNT PAID TO YOUJIE FOR

THE PRODUCT. THESE LIMITATIONS ON LIABILITY SHALL

REMAIN IN FULL FORCE AND EFFECT EVEN WHEN YOUJIE

MAY HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH

INJURIES, LOSSES, OR DAMAGES. SOME STATES, PROV-

INCES, OR COUNTRIES DO NOT ALLOW THE EXCLUSION OR

LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,

SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY

TO YOU.

All provisions of this Limited Warranty are separate and severable,

which means that if any provision is held invalid and unenforceable,

such determination shall not a ect the validity of enforceability of the

other provisions hereof. Use of any peripherals not provided by the

manufacturer may result in damage not covered by this warranty.

This includes but is not limited to: cables, power supplies, cradles,

and docking stations. Youjie extends these warranties only to the

st end-users of the products. These warranties are non-transfer-

able.
The duration of the limited warranty for the Youjie 4600 scanner is

ninety (90) days.