manualshive.com logo in svg

Portwell WADE-8041, Руководства, Страница: 40 / 58

Поделиться
Скачать
Portwell WADE-8041 Скачать руководство пользователя страница 40

BIOS Setup Information

 

WADE-8041 User’s Manual 

4-9 

 

Security Option 

Select whether the password is required every time the system boots or only when 
you enter setup. 
 

System 

The system will not boot and access to Setup will be denied if the 
correct password is not entered at the prompt. 

Setup 

The system will boot, but access to Setup will be denied if the correct 
password is not entered at the prompt. 

 

Note: 

To disable security, select PASSWORD SETTING at Main Menu and then you will be 
asked to enter password.  Do not type anything and just press <Enter>, it will disable 
security.  Once the security is disabled, the system will boot and you can enter Setup 
freely. 
 

APIC Mode 

The choice: Enabled, Disabled. 
 

MPS Version Control For OS 

The choice: 1.1, 1.4 
 

OS Select For DRAM > 64MB 

Select OS/2 only if you are running OS/2 operating system with greater than 64MB 
of RAM on the system. 
 
The choice: Non-OS2, OS2. 

 

Small Logo (EPA) Show 

Enabled 

The EPA logo will appear during system boot-up. 

Disabled 

The EPA logo will not appear during system boot-up. 

 
 

Содержание WADE-8041



























































Отзывы:

Нет отзывов