BIOS Setup Information
ROBO-8911VG2A User’s Manual
4-25
Resource Controlled By
BIOS can automatically configure the entire boot and plug and play compatible
devices. If you choose Auto, you cannot select IRQ DMA and memory base address
fields, since BIOS automatically assigns them.
The choice: Auto (ESCD), Manual.
IRQ Resources
When resources are controlled manually, assign each system interrupt a type,
depending on the type of device using the interrupt.
Enter for more options
IRQ-3/IRQ-4/IRQ-5/IRQ-7/IRQ-9/IRQ-10/IRQ-11/IRQ-12/IRQ-14/IRQ-15
assigned to.
Legacy ISA for devices compliant with the original PC AT bus specification, PCI/ISA
PnP for devices compliant with the plug and play standard whether designed for PCI
or ISA bus architecture.
The choice: PCI Device / Reserved.
PCI/VGA Palette Snoop
The choice: Enabled, Disabled.
Assign IRQ For VGA
To enable VGA IRQ assignation by selecting enabled.
The choice: Enabled, Disabled.
INT Pin 1 Assignment
Devices (S) using this INT: Network Cntrlr – Bus 1 Dev 11 Func 0. Display Cntrlr –
Bus 0 Dev 2 Func 0. USB 1.0/1.1 UHCI Cntrlr – Bus 0 Dev29 Func 3.
The choice: Auto, 3, 4, 5, 7, 9, 10, 11, 12, 14, 15.
INT Pin 2 Assignment
Devices (S) using this INT: Network Cntrlr – Bus 1 Dev 10 Func 0. Multimedia
Device – Bus 0 Dev 30 Func 2.
The choice: Auto, 3, 4, 5, 7, 9, 10, 11, 12, 14, 15.
