Portwell ROBO-8911VG2A, Руководство пользователя, Страница: 13 / 82

Hardware Configuration
ROBO-8911VG2A User’s Manual 2-4
JP7 : LVDS panel type selection
JP7 Function
1-2, 3-4, 5-6, 7-8 Panel type
Short, short, short, short Setup by “CMOS setup” in the “chipset feature”
Ì
Open, short, short, short 640x480 18bit single channel
Short, open, short, short 800x600 18bit single channel
Open, open, short, short 1024x768 18bit single channel
Short, short, open, short Reserved
Open, short, open, short Reserved
Short, open, open, short Reserved
Open, open, open, short 1400x1050 18bit dual channel
Short, short, short, open Reserved
Open, short, short, open Reserved
Short, open, short, open Reserved
Open, open, short, open Reserved
Short, short, open, open Reserved
Open, short, open, open Reserved
Short, open, open, open Reserved
Open, open, open, open Reserved
JP8 : Reserved jumper
JP8 Function
Short Reserved
Open Reserved
JP9 : ATX/AT Mode Function selection
JP9 Function
1-2 Open ATX Mode
Ì
1-2 short AT Power Emulation
Note:
“AT Power Emulation” means the ROBO-8911VG2A is able to be auto power up once power
cord is plugged in ATX power supply. However, user need set BIOS setup menu “PWRON
after PWR FAIL” to “ON” if you need auto power up function.