System Installation
ROBO-8777VG2A User’s Manual
3-4
CPU FSB
Bandwidth
1066MHz 8.5
GB/s
800MHz 6.4GB/s
533MHz 4.2GB/s
Memory Frequency
Dual Channel DDR2
Bandwidth
Single Channel DDR2
Bandwidth
800MHz
25.6 GB/s
12.8 GB/s
667MHz
21.2 GB/s
10.6 GB/s
533MHz
16.8 GB/s
8.4 GB/s
Note:
To maintain system stability, don’t change any of DRAM parameters in BIOS setup
to upgrade system performance without acquiring technical information.
Memory frequency / CPU FSB synchronization
ROBO-8777VG2A series support different memory frequencies depending on the
CPU front side bus and the type of DDR2 DIMM.
CPU FSB
Memory Frequency
1066MHz 800/667/533MHz
800MHz 667/533MHz
533MHz 533MHz
3.3
Installing the Single Board Computer
To install your ROBO-8777VG2A into standard chassis or proprietary environment,
please perform the following:
Step 1 : Check all jumpers setting on proper position
Step 2 : Install and configure CPU and memory module on right position
Step 3 : Place ROBO-8777VG2A into the dedicated position in the system
Step 4 : Attach cables to existing peripheral devices and secure it
WARNING
Please ensure that SBC is properly inserted and fixed by mechanism. Otherwise, the
system might be unstable or do not work due to bad contact of PICMG 1.0 PCI plus
ISA-bus slot.
Note:
Please refer since section 3.3.1 to 3.3.4 to install INF/VGA/LAN drivers.
