Troubleshooting
ROBO-8773VG User’s Manual
5-2
Figure 5-1
Note:
Due to the fact that different power supply has different definition of pin
assignments. Therefore, please check Pin assignment on Power Supply or ask your
vendor.
Serial ATA Hard Disk Setting
There are total two connectors, J18 and J24. The installation of Serial ATA is simpler
and easier than IDE, because SATA hard disk doesn’t require setting up Master and
Slave, which can reduce mistake of hardware installation. All you need to do is to
plug in two cables and enable SATA in System BIOS. (The Serial ATA hard disk of
installation, please see figure 5-2 as below)
Figure 5-2
