System Installation
ROBO-8773VG User’s Manual
3-5
3.3.1
Chipset Component Driver
The chipset used on ROBO-8773VG is relatively new which operating systems might
not be able to recognize. To overcome this compatibility issue, for Windows
Operating Systems such as Windows-2000/XP, please install its INF before any of
other Drivers are installed.
3.3.2
Intel Integrated Graphics GMCH Chip
Using Intel 865GMCH High performance graphic integrated chipset is aimed to gain
an outstanding graphic performance. It is accompanied by shared 8 to 64MB system
DDR-SDRAM with Intel DVMT. This combination makes ROBO-8773VG an
excellent piece of multimedia hardware.
With no additional video adaptor, this onboard video will usually be the system
display output. By adjusting the BIOS setting to disable on-board VGA, an add-on
PCI or ISA VGA card can take over the system display.
Drivers Support
Please find 865GMCH driver in the ROBO-8773VG CD-title. Drivers support
Windows-2000, Windows XP, OS2, and Linux.
3.3.3
Gigabit Ethernet Controller
Drivers Support
Please find RTL 8110SC LAN driver in /Ethernet directory of ROBO-8773VG CD-
title.
The drivers support Windows-2000, Windows-XP, and Linux.
LED Indicator (for LAN status)
ROBO-8773VG provides two LED indicators to report RTL 8110SC Gigabit Ethernet
interface status. Please refer to the table below as a quick reference guide.
Operation of Ethernet Port
8110SC
Color
Name of LED
ON
OFF
Status
LED
Green
LAN Linked & Active LED
Linked
Active
(Blinking)
Orange
Giga
Mbps
100
Mbps
10 Mbps
Speed
LED
Green
LAN speed LED
Orange
Green Off
