System Installation
ROBO-6710/6730VLA User’s Manual
3-2
To un-install the current processor, use a screwdriver to disengage (open) the socket
actuator, as shown in Figure 1 below. The socket actuator should open after only a
half turn or so, and you should then be able to remove the processor with your
fingers.
3.2 Main
Memory
One SODIMM socket support 200/266 DDR-SDRAM up to 1GB System Memory.
ROBO-6710/6730 will automatically detect memory clock, based on the processor
and DDR-SDRAM used.
For system compatibility and stability, don’t use memory module without brand.
You can also use single-sided or double-sided DDR without ECC feature.
Watch out the contact and lock integrity of memory module with socket, it will
impact on the system reliability. Follow normal procedure to install your DDR
module into memory socket. Before locking, make sure that the module has been
fully inserted into the card slot.
Install your DDR SODIMM module:
