1 ROBO-625 Startup Manual
ROBO-625 ISA VIA Half-sized CPU card with
CPU, VGA/LCD, and Ethernet
Startup Manual
Before you begin installing your card, please make sure
that the following materials have been shipped:
• 1 ROBO-625 all-in-one single board computer
• 1 startup manual
• CD-ROM or disks for utility, drivers, and manual (in PDF
format)
• 1 power cable p/n: 77030234
• 1 PS/2 KB/M cable p/n : 77000157
• 1 COM port cable p/n :77001783
• 1 Printer cable p/n :77002106
• 1 VGA cable p/n :77011241
• 1 FDD cable p/n :77013612
• 1 EIDE cable p/n :77014961
If any of these items are missing or damaged, contact
your distributor or sales representative immediately.
Note: For detailed contents of the ROBO-625, please refer
to the enclosed CD-ROM or disk (in PDF format).
•
CPU:
Onboard Ezra 800MHz
•
BIOS:
Award 256 KB Flash memory
•
System memory:
One DIMM socket accepts 64 MB up
to 512 MB SDRAM
•
2nd cache memory:
64 KB on the processor
•
Enhanced IDE interface:
One channel supports up to
two EIDE devices. BIOS auto-detect, PIO Mode 3 or
Mode 4, UDMA 33/66/100 mode.
•
FDD interface:
Supports up to two FDDs
•
Serial ports:
Two serial RS-232 ports
For more information on this and other Portwell
products, please visit our website at:
ht t p :/ /w ww.
portwell
. co m
For technical support and service, please visit our support
website at:
http:/ /
isc.portwell
.
com
.
tw
This manual is for the Robo-625 series, Rev. A1.
Part No. 2006677200
2nd Edition
Printed in U S A
Sept, 2002
•
Parallel port:
One parallel port, supports SPP/EPP/
ECP mode
•
Keyboard/mouse connector:
Supports standard PC/
AT keyboard and a PS/2 mouse
•
Power management:
Supports power saving modes
including Normal/Standby/Suspend modes. APM 1.2
compliant
•
Watchdog timer:
62 level timer intervals
•
USB:
Two universal serial bus ports
Solid State Disk
• Supports one 50-pin socket for CFC type I/II
VGA/LCD Interface
•
Chipset:
VIA Twister chip with integrated Savage4 2D/
3D/Video Accelerator
•
Frame buffer:
Supports 8/16/32 MB frame buffer with
system memory
•
Interface:
4X AGP VGA/LCD interface, Support for 18
bit TFT
•
Display modes:
CRT Modes: 1280 x 1024@16bpp (60 Hz),
1024 x 768 @16bpp (85 Hz);
LCD/Simultaneous Modes:
800 x 600@18bpp (60 Hz),
640 x 480@18bpp (60 Hz)
Ethernet interface
•
Chipset:
RTL 8139C Plus
•
Ethernet interface:
IEEE 802.3u 10/100BASE-T Fast
Ethernet compatible
• I/O address switchless setting
Mechanical and Environmental
•
Dimensions (L x W):
185 x 122 mm (7.28” x 4.80”)
•
Power supply voltage:
+5 V, +12 V ± 5%
•
Power requirements:
Max
4.5 A @ +5 V, 0.5 A @+12 V
typical
3.3 A @ 5 V, (with 256 MB DRAM, Ezra 800 MHz CPU)
2.78 A @ 5 V, (with 256 MB DRAM, Eden 400 MHz CPU)
•
Operating temperature:
0 ~ 60°C (32 ~ 140°F)
•
Weight:
0.27 kg (weight of total package)
Packing List
Specifications
R
OBO
-6
25
ISA VIA Half-sized CPU ca
rd
with CPU, VGA/LCD, and
Ethe
rnet
