Portwell PEB-2773VG2ATM, Руководство пользователя

Страница: 31 / 102

PEB-2773VG2ATM
Copyright © Portwell 2017 PEB-2773VG2ATM User's Guide 31
Write_EC_SRAM(WDTSEC,30);
Write_EC_SRAM(WDTCFG,0x01); //Bit0: WDT Enable, BIT1: 0:Second Mode
// Enable WDT 5min
Write_EC_SRAM(WDTSEC,5);
Write_EC_SRAM(WDTCFG,0x03); //Bit0: WDT Enable, BIT1: 1:Minute Mode
// Enable WDT 10min, 20sec
Write_EC_SRAM(WDTSEC,20);
Write_EC_SRAM(WDTSEC,10);
Write_EC_SRAM(WDTCFG,0x03); //Bit0: WDT Enable, BIT1: 1:Minute Mode
}
5.2 Signal GPIO Signal
#Define GPCR 0x2B // GPIO Coutrol Register, Bit7 = GPIO7, Bit6 = GPIO6, ...,
// 0: Output; 1: Input
#Define GPDR 0x2C // GPIO Status Register, Bit7 = GPIO7, Bit6 = GPIO6, ...,
// 0: Low; 1: High
#Define EC_IOPort 0xE300 // Default, reference to BIOS configuration
VOID Write_EC_SRAM(UINT8 Offset,UINT8 Value){