System Installation
PEB-2739I User’s Manual
3-1
Chapter 3
System Installation
This chapter provides you with instructions to set up your system. The additional
information is enclosed to help you set up onboard PCI device and handle Watch
Dog Timer (WDT) and operation of GPIO in software programming.
3.1 System
Architecture
- Intel® Atom™ Processor Z510PT (512K Cache, 1.10 GHz, 400 MHz FSB)
- Intel® Atom™ Processor Z520PT (512K Cache, 1.33 GHz, 533 MHz FSB)
3.2 System
Architecture
PEB-2739I provide 1 x 200pin SO-DIMM sockets which supports 400/533 DDR2-
SODIMM as main memory, Non-ECC (Error Checking and Correcting), non-register
functions. The maximum memory can be up to 2GB. Memory clock and related
settings can be detected by BIOS via SPD interface.
For system compatibility and stability, do not use memory module without brand.
Memory configuration can be set to either one double-sided DIMM in one DIMM
socket.
Beware of the connection and lock integrity from memory module to socket.
Inserting improperly it will affect the system reliability.
Before locking, make sure that all modules have been fully inserted into the card
slots.
Note:
To insure the system stability, please do not change any of DRAM parameters in
BIOS setup to modify system the performance without acquired technical
information.