Connecting Ethernet and USB Cables
The Ethernet connection is a 10/100 Mbps Ethernet interface that will auto-negotiate
link speed and duplexing. Any RJ45 compatible connector will fit the PSA1U1E.
The PSA1U1E uses a Type-B receptacle to connect to other USB devices. The target
use will require a specific cable and sometimes customized cable. To review what
cables are needed for tested configurations, review the PSA1U1E product page at
www.Portsmith.com
.
Connect Ethernet before connecting USB. After all cables are connected, the
PSA1U1E’s USB LED will turn green, indicating a physical connection has been
made. After a few seconds, the Windows CE or Mobile operating system will
indicate a network connection has been established and may prompt you for
information regarding network access rules for Internet or Work area connections.
Connect Ethernet Connect USB Connected Indicator
Regulatory Compliance Information
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio or television technician for help.
Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Copyright © Portsmith Technologies 2012 – All Rights Reserved
