USER MANUAL
–
Portman P2 hexaline |
Preparation for use
P2 hexaline v2.0
9/16
Preparation for use
AC power connection
The Portman Lights P2 Hexaline must be installed at 200-240V and 50/60Hz. Fixture
automatically detects the alternating current frequency. To power the fixture simply
plug in the powerCon TRUE1 and set the switch to “ON”. Use only high quality
2.5 mm
diameter or larger power feed cables. Make sure you are always connecting the fixtures
to a protected circuit with appropriate electrical ground. Do never connect the fixture
to a dimmer plug, even if it supplies proper current.
Only qualified electricians in accordance with all known electrical regulations can install
the fixtures.
The P2 comes with power input cord terminated with powerCON TRUE1 on one end
and Uni - Schuko plug on the other end (for European market). If your cord has got no
Uni
–
Shuko plug, or you want to change the plug follow the rules from table below:
Connection
EU wires
US wires
Live
L
Brown
Black
Neutral
N
Blue
White
Earth
Green/Yellow
Green or Green/Yellow
REMEMBER!
Only qualified person can change or install the plug!
Installation
Before mounting the fixture read and follow the safety recommendations indicated in
the Safety Information.
The Portman P2 Hexaline may be installed on attached base (also using the size
adaptor), hang on 2 points on the back of the fixture using rigging clamps or hang using
hanging adaptor. The fixture and the hanging adaptor have 15 mm hole for spigot or
rigging clamp. Before rigging operations make sure, that the structure onto which you
are mounting the fixtures can withstand the weight of all of the fixtures. Check if there
is enough room for ventilation, configuration and maintenance in a location where you
want to place the fixture. You must secure every hanged fixture with appropriate safety
wire.
base
height adaptor
mounting point
on the back
hanging adaptor
