USER MANUAL – Portman Custom Lights P1 Retro Lamp
|
Preparation for use
10/23
Kit content
1 x Portman P1 Mini
1 x AC power wire (powerCON TRUE1)
1 x User manual
Preparation for use
AC power connection
The Portman Custom Lights P1 Mini must be installed at 100-240V and 50/60Hz.
Fixture automatically detects the alternating current frequency. To turn on the fixture
simply plug in the powerCON TRUE1 and set the power switch to “ON”. Use only high
quality 3 x 2.5 mm
2
or larger mains power cords. Inspect all the power feed cables for
damages before use. Make sure to always connect the fixtures to a protected circuit
with appropriate electrical ground. Do never connect the fixture to a dimmer plug,
even if it supplies proper current.
Only qualified electricians in accordance with all known electrical regulations can
install the fixtures.
The P1 Mini comes with power input cord terminated with powerCON TRUE1 on one
end and tube connectors on the other end. Follow the rules from table below to
assemble power plug to the wire:
Connection
EU wires
US wires
Live
L
Brown
Black
Neutral
N
Blue
White
Earth
Green/Yellow
Green or Green/Yellow
CAUTION!
Do not use the power cord without a plug attached!
REMEMBER!
Only qualified person can change or install the plug!
