PORTMAN P1 Mini Скачать руководство пользователя страница 5

Страница: 5 / 23

USER MANUAL – Portman Custom Lights P1 Mini

Safety information

P1 Mini

5/23

Protection against electrical shock



Disconnect the fixture from AC power when not in use.



Disconnect the fixture from AC power before any operation.



Do not remove the rear cover. There are no user-serviceable parts inside.



Always ground the fixture electrically.



Use only the wires attached to the kit.



Use only a source of AC power that complies with local building and electrical

codes and has both overload and ground-fault protection.



Do not expose the fixture to rain or moisture.



Replace the lamp or fuse only as described.

Protection against burns and fire



Never operate when the fixture is damaged or some part is missing.



Do not touch surface when the fixture is in operation. The exterior of the fixture

can reach temperatures up to 100°C (212°F). Allow the fixture to cool

approximately 30 minutes before any operation.



Replace the lamp when it becomes defective or worn out.



Never attempt to bypass the fuse. Always replace defective fuses with ones of the

specified type and rating.



Keep all combustible and flammable materials (for example fabric, wood, paper)

at a distance of at least 1 meter away from the fixture. Do not cover the fixture

when in operation and when it is hot.



Do not modify the fixture.



Do not operate the fixture if the ambient air temperature exceeds 45°C (113°F).



Do not operate the fixture after extreme change of surrounding environment

temperature. Allow the fixture to acclimate for at least an hour before operating.

Protection against falls



Use only professional tripods and clamps to mount the fixture. Ensure, that the

clamp or tripod is designed to withstand the weight of the fixture.



Ensure that the structure intended for installation can hold at least 10 times the

weight of all installed devices.



Ensure that all fixtures are attached correctly to the structure, after having

checked that the housing is firmly closed and all screws are tightly fastened and

use an approved means of secondary attachment such as a safety cable.



Block access below the work area whenever installing or removing the fixture.

Содержание P1 Mini
























Результаты поиска

Содержание P1 Mini

Отзывы:

Похожие инструкции для P1 Mini

Бренды по названию

Популярные бренды

PORTMAN P1 Mini, Руководство пользователя

Результаты поиска

Содержание P1 Mini

Отзывы:

Похожие инструкции для P1 Mini

Бренды по названию

Популярные бренды