USER MANUAL – Portman Custom Lights P1 Mini
|
Preparation for use
P1 Mini
11/23
Installation
Before mounting the fixture read and follow the safety recommendations indicated in
the Safety Information.
The Portman P1 Mini may be installed on a tripod or on a clamp. The fixture has 13 mm
(0,512 in) hole for a spigot, rigging clamp or a screw. Before rigging operations make
sure, that the structure onto which you are mounting the fixtures can withstand the
weight of all of the fixtures. Check if there is enough room for ventilation, configuration
and maintenance in a location where you want to place the fixture. You must secure
every hanged fixture with appropriate safety wire.
REMEMBER!
Always secure hanged fixture with safety wire!
To adjust the position of the fixture when aiming it to the desired angle, use the side
handles. Loosen them by turning them counterclockwise before adjustment and set
the desired angle. Tighten the handles after adjusting the position by turning them
clockwise. Operate handles carefully and manually only. Tools can damage them.
Always double check if the fixture’s handles are tightened properly.
