Porsche Taycan, Руководство пользователя

Страница: 92 / 302

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Charging
90
e
Check that the vehicle plug is inserted correctly.
e
Refer to the separate instructions for the Por-
sche charging equipment, instructions for the
vehicle charging cable used and instructions on
the charging station.
e Remove and insert the vehicle plug again.
– or –
1. Switch off and leave the vehicle.
2. Remove the vehicle plug from the vehicle charge
port.
3. Close doors, windows and charging ports, lock
the vehicle and vacate the reaction area of the
keyless Comfort Access system.
4. Wait approx. 5 minutes. Do not use the app to
access the vehicle during this time.
5. Insert the vehicle plug into the vehicle charge
port and start the charging process again.
Ending the charging process and
removing the vehicle plug from
the vehicle charge port
1. Unlock the vehicle.
2. Press the release button on the vehicle charge
port.
The vehicle plug is unlocked. If a charging proc-
ess has been started, it will be stopped.
3. Press the release button ( B ) on the vehicle plug
and pull the vehicle plug out of the vehicle
charge port within approx. 20 seconds.
4. Disconnect the vehicle charging cable from the
power supply and store it in a safe place.
5. Close the charge port door.
Information
– Observe the specified sequence for charging the
high-voltage battery.
– End the charging process before disconnecting
the vehicle charging cable from the electrical
socket.
– An ongoing charging process can be ended at
any time by releasing the vehicle plug.
– Observe the safety instructions for charging the
high-voltage battery.
Using the direct charging function
When the timer or profile function is activated, the
direct charging function can be activated via the
central display and the center console operating
panel. The high-voltage battery charges regardless
of the timer or profile function, up to a maximum
charge state of 100 %. If the timer or profile function
is not activated, it is not necessary to activate the
direct charging function. The charging process
starts automatically when the vehicle plug is
inserted..
b b Vehicle plug inserted.
b b Timer or profile function activated.
Central display
1. e Charging e Overview
2. Activate Direct charging .
The high-voltage battery is charged.
Center console control panel
1. Tap the softkey.
2. Tap the Direct charging softkey.
The high-voltage battery is charged.
Using the charging functions in
the central display
The Timer and Profile charging functions can be
used to program different parameters for the charg-
ing processes on the central display. Both functions
are only available in conjunction with alternating
current (AC) charging.
Suitable charging equipment is required to make full
use of all charging functions. Further information on
the charger and the web application is available
under "E-Performance" at the following web ad-
dress: https://www.porsche.com.
Using the charge level display
Fig. 48: Charge level display
The battery charge condition displays in the central
display and center console operating panel show
different information about the charge state of the
high-voltage battery, including the current charge
state, the current charging power and the settings of
the timer and profile function.
Programming and activating the timer
b b Departure time in the future.
When the timer function is active, the high-voltage
battery is charged to a specified target charge state
at a programmed departure time. If the charge state