Porsche Taycan, Руководство пользователя

Страница: 48 / 302

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Adaptive Cruise Control (ACC)
46
distance depends on the driving speed. It reduces as
the vehicle slows down and increases as it speeds
up.
Fig. 14: Setting the desired distance
Increasing the desired distance
e Briefly press rocker switch Z upward.
Another segment is shown in the desired dis-
tance display E .
Reducing the desired distance
e Briefly press rocker switch Z downward.
A segment disappears in the desired distance
display E .
Information
When the system display is not active, pressing
switch Z for the first time displays the main menu for
the driver assistance system without changing the
desired distance.
Displaying the distance from the vehicle in
front
Symbol Suitable for
Distance at
75 mph (120
km/h)
Traveling at
speed in lines of
traffic
approx.
108 ft. (33 m)
(
≙
1 sec.)
Driving in lines of
traffic
approx.
154 ft. (47 m)
(
≙
ap-
prox. 1.4 sec.)
Corresponds to
"half speedome-
ter distance"
approx.
197 ft. (60 m)
(
≙
ap-
prox. 1.8 sec.)
Driving on coun-
try roads
approx.
239 ft. (73 m)
(
≙
ap-
prox. 2.2 sec.)
Driving in sparse
traffic
approx.
285 ft. (87 m)
(
≙
ap-
prox. 2.6 sec.)
Overriding speed and distance
control temporarily
Speed and distance control can be overridden tem-
porarily by pressing the accelerator pedal. This is
useful when passing, for example.
b b ACC is active.
1. Press the accelerator.
The system is passive , while the accelerator is
pressed.
2. Take your foot off the accelerator pedal.
The system is active .
Interrupting and resuming speed
and distance control
If the system is interrupted, it switches to passive
standby mode and must be reactivated manually.
Interrupting control
e Press the brake pedal.
– or –
e
Press the control lever down ( CANCEL ).
The system is passive . The desired speed and
distance settings remain stored.
The status display changes from green to gray.
Information
When the vehicle is stationary, the speed and dis-
tance control can only be canceled using the control
lever.
Resuming control
e Briefly press the control lever upward ( RESUME ).
The system is active . The desired speed and
distance settings are applied again.
The status display changes from gray to green.
Information
ACC can be activated even while the vehicle is sta-
tionary by briefly pressing the control lever upward.