Porsche Taycan, Руководство пользователя

Страница: 259 / 302

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Wheels and Tires
257
Cold inflation pressure
The tire pressure of a cold tire with ambient tem-
perature maximum 68 °F / 20 °C and the vehicle out
of direct sunlight exposure.
Maximum permissible inflation pressure
The maximum cold inflation pressure to which a tire
may be inflated.
Recommended inflation pressure
The cold inflation pressure found on the tire pressure
plate.
kPa (Kilopascal)
A metric unit for tire pressure.
PSI (Pounds per square inch)
A standard unit for tire pressure.
>
Please see chapter "Loading Information" on
page 274.
Overloading
DANGER
Overloading
Overloading can lead to dangerous vehicle reactions
and long braking distances.
e Do not overload your vehicle. Be careful about
the roof load.
e If you plan to load the vehicle, first correct the
tire pressure. Tire pressure for loaded vehicle can
be found on the tire pressure plate and in the
chapter technical data.
e
Never exceed the specified axle load.
NOTICE
Risk of damage to the vehicle and to the tires. Dam-
age due to overloading is not covered by the vehicle
warranty.
Tire damage may also be caused by overloading, and
this damage is not covered by your tire warranty.
e Do not overload your vehicle. Be careful about
the roof load.
e
If you plan to load the vehicle, first correct the
tire pressure. Tire pressure for loaded vehicle can
be found on the tire pressure plate and in the
chapter “Technical Data”.
e Never exceed the specified axle load.
Inflating tires
CAUTION
Hot filler hose
The compressor filler hose can become hot during
filling and cause burns.
e Wear gloves.
The compressor is stored in the right-hand box at
the front of the front luggage compartment.
> Please see chapter "Luggage Compartment" on
page 154.
> Comply with the operating instructions on the
compressor.
1. Screw the compressor filler hose onto the tire
valve.
2. Connect the compressor to a socket in the ve-
hicle and switch on the compressor.
The tire is inflated.
3. Check inflation pressure using the pressure gage
and reduce tire pressure or continue filling as
required. Check the inflation pressure again.
4. Switch off the compressor.
5. Unscrew the compressor filler hose.
Information
You can also check the tire pressure and inflate your
tires at service stations.
Reducing inflation pressure
1. Switch off the compressor.
2. Open air bleed screw on the filler hose until the
correct inflation pressure is achieved.
Reading off inscription on tires
Fig. 203: Inscription on radial tires
A – Tire size
Example: P 225/55R19 (103Y) XL
– P – The tire is designed for Passenger vehicle.
This information is not included on all tires.
– 225 – Indication of tire width in mm
– 55 – Indication of tire height to tire width ratio in
percent
– R – Belt type code letter for radial
– 19 – Indication of rim diameter in inches