Porsche Taycan, Руководство пользователя

Страница: 257 / 302

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Wheels and Tires
255
wheel change or changes in vehicle loading).
e
Select tire type and size in the Tire Pressure
Monitoring menu again, even if a newly mounted
wheel set corresponds to the settings of the
predecessor.
Displaying inflation information
b b
Vehicle is stationary.
e e Settings e Vehicle e Tire pressure
monitoring
The settings for loading and the type and size of the
tire are displayed.
For tires that have not yet been identified, dashes
(-.-) are shown in place of the tire pressure levels.
Displaying pressure deviation
b b
Vehicle is stationary.
e e
Settings
e
Vehicle
e
Tire pressure
monitoring e Pressure deviation
Displayed are the target pressure and pressure de-
viation relative to the target pressure in each tire
along with the information on the load, type and size
of the tire.
Example: If the reading for the right rear tire is
shown as –0.1 bar , this tire needs to be inflated by
1.4 psi (0.1 bar). The tire temperature has already
been taken into account in the pressures shown.
e
You should only use the pressure difference from
the display or the corresponding tire pressure
warning to correct the tire pressure.
In the case of tires that have not yet been taught-in,
the new target pressures are displayed instead of
the actual pressure differences.
Setting the tire type and tire size
Information
The options available depend on the model and tire
type. It is therefore possible that not all the options
shown here are available.
e Before fitting tires and wheels with dimensions
that are not available for selection in the Tire
Pressure Monitoring System menu, the missing
information should be added. Visit an authorized
Porsche dealer. Porsche recommends an author-
ized Porsche dealer, as they have trained techni-
cians and the necessary parts and tools.
e
Only use tires and wheels approved by Porsche.
e e Settings e Vehicle e Tire pressure
monitoring e Tire selection
Selecting full load or partial load
e e Settings e Vehicle e Tire pressure
monitoring e Full Load
Full load
Full load is activated.
Full load
Partial load is activated.
e Adapt the tire pressures to the selected load
type.
Information
If the option Full load is not displayed, the specified
tire pressures are valid for all types of vehicle load.
Learning the Tire Pressure Monitoring System
After the tires have been changed, the wheel sensor
has been replaced, or the tire settings have been
updated, the Tire Pressure Monitoring System starts
learning the tires. The tire pressure control system
recognizes the wheels and their installation position.
The position and pressure data is available as soon
as theTire Pressure Monitoring System has assigned
the recognized wheels to the correct wheel position.
During the learning process, the target pressures for
cold tires (68 °F) are shown on the central display,
and a message appears on the instrument cluster.
The tire pressure warning light
in the instrument
cluster remains illuminated until the information for
all of the tires has been learned.
Uniform Tire Quality Grading and
Glossary of Tire Terminology
WARNING
Tire Abuse
The temperature grade for this tire is established for
a tire that is properly inflated and not overloaded.
Excessive speed, underinflation, or excessive load-
ing, either separately or in combination, can cause
heat buildup and possible tire failure.
e Do not exceed the permitted maximum speed for
the tires fitted to the vehicle.
e Ensure that the tires are set to the correct infla-
tion pressure.
e
Observe the maximum load for the vehicle.