Porsche Taycan, Руководство пользователя

Страница: 173 / 302

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Porsche Active Suspension Management (PASM)
171
Selecting the chassis height via the central
display
b b Operational readiness established.
e e Drive e Chassis height
Selecting the “Lift“ chassis height via the
button
The “Lift“ chassis height can be selected using the
button on the instrument cluster to quickly increase
the ground clearance.
Fig. 119: Lift button
b b
Operational readiness established.
e
Press the button.
Display of the selected chassis height on the
instrument cluster
The last selected chassis height is shown on the in-
strument cluster. It continues to be displayed even
after the vehicle is switched off.
Display Chassis height
None Medium
Lift
Display Chassis height
Lowered
Low
Information
The vehicle is not lowered when the door is open.
The selected level is set after closing the door.
Information
Frequent chassis height changes can cause the
compressor to overheat. In this case, the compres-
sor must cool for several minutes before the leveling
system is fully functional again. The selected height
is set automatically once the compressor has cooled
down.
Switching the height control system off
WARNING
Lifting the vehicle
If the PASM displays a warning message or the ve-
hicle is too hot, there is a risk of injuries and damage
from raising the vehicle.
e Only raise the vehicle after it has cooled down.
e Do not perform any work on the chassis when-
ever the PASM displays a warning message ei-
ther. Visit an qualified specialist repair shop.
Porsche recommends an authorized Porsche
dealer, as they have trained technicians and the
necessary parts and tools.
WARNING
Control operation of the
leveling system
A vehicle on which the leveling system is activated
can move unexpectedly or tip or fall off lifting
equipment, e.g. a jack or lifting platform. This can
cause serious injuries and damage.
e
Manually set medium height and switch off the
height control system before lifting the vehicle.
> Please see chapter "Jack and Lifting Platform" on
page 141.
e e Settings e Vehicle e Additional chas-
sis settings
e
Deactivate chassis adjustments
to use a jack
Information
The leveling system switches on automatically at
speeds above approx. 4 mph (7 km/h).
Automatic lift function
With the automatic lift function, the vehicle "Lift"
level can be adjusted automatically based on the
location.
b b Vehicles with air suspension.
NOTICE
The system must not induce you to take risks with
your safety. Responsibility when driving, such as
choosing an appropriate speed, remains with the
driver. The automatic lift function is not a substitute
for the driver's attentiveness.
Even at the vehicle "Lift" level, contact with an ob-
stacle cannot be prevented if the driving speed is