Porsche Mobile Charger Connect, Руководство пользователя, Страница: 29 / 646

Operation
27
g For information on the web application, refer to the
instructions at https://www.porsche.com/interna-
tional/ aboutporsche/e-performance/help-andcon-
tact/
Using the web application
Opening the web application
Establishing a Connection to the Charger
If the charger was integrated in your existing home
network (WiFi or Powerline Communication) during
setup, it is possible to access the web application
using the assigned IP address.
For information on establishing network connections
g
Refer to chapter "Connections" on page 28..
Opening the web application via WiFi
b The end device and the charger are in the same
WiFi network.
1. Open the browser.
2. In the address bar of the browser: enter the
IP address assigned during configuration (under
Settings
e
Networks
e
Network information
on the charger), or the host name of the charger
(provided in the letter containing access data).
Opening the web application via Powerline Com-
munication
b
The end device and charger are in the same net-
work via a PLC connection.
1. Open the browser.
2. In the address bar of the browser: enter the
IP address assigned during configuration (under
Settings e Networks e Network information
on the charger).
Opening the web application via the hotspot
Alternatively, a connection can be established via the
hotspot. The charger offers a wireless access point
(hotspot), which is protected by a password and re-
quires a manual login. A WiFi-enabled end device can
connect with the hotspot and access the charger‘s
web application. Integration in the home network can
take place at any time in the web application.
b The charger is switched on. The charger opens
its WiFi hotspot automatically.
1. Tap the network icon or WiFi icon in the info bar
on the end device.
2. Select WiFi network from the list. The name of
the WiFi network corresponds to the SSID in the
letter containing access data and is displayed as
ICCPD-####### .
3. Press the Connect button.
4. Enter the network key in the field Security key
(designated in the letter containing access data
as WiFi PSK ).
🡆
The connection to the WiFi network is es-
tablished.
Please note: For the Windows 10 operat-
ing system, the PIN entry for the router
is requested first. Select the link Connect
instead using a network security code and
then enter the code.
5. Open the browser.
6. Enter the following IP address in the browser‘s
address bar. 192.168.0.1 .