39
Cleaning
DE
EN
FR
IT
ES
PT
NL
SV
FI
DA
NO
EL
CZ
HU
PL
HR
SR
SK
SL
ET
LT
LV
RO
BG
MK
Attaching the Control Unit to the
Charging Dock
Fig. 12: Attaching the control unit
1.
Open the door of the charging dock.
2.
Position the control unit under the locking tabs
of the charging dock and engage at the rear.
3.
Guide the vehicle cable through the opening
A
and wrap any excess cable around the
charging dock.
4.
Insert the supply cable into the electrical socket.
5.
Close the door of the charging dock.
Removing the Control Unit from
the Charging Dock
Fig. 13: Removing the control unit
1.
Open the door of the charging dock.
2.
Disconnect the supply cable from the electrical
socket.
3.
Unwind the vehicle cable fully from the
charging dock.
4.
Detach the control unit from the mount by
pressing the release switch (arrow) and remove.
Cleaning
Check the charger for damage and soiling at regular
intervals and clean it if necessary.
Disposal
Electrical/electronic devices can be handed in
at a collection point or waste management facility.
e
Do not throw electrical/electronic devices in with
household waste.
e
Dispose of electrical/electronic devices
in accordance with the applicable environmental
protection regulations.
e
If you have questions about disposal, contact
a Porsche partner.
Further Information
Further information on the charger and the web
application is available under “E-Performance” at the
following web address:
https://www.porsche.com
NOTICE
Damage to the
charger
e
Always keep the doors closed.
e
Do not place objects on the door or on the charging
dock.
DANGER
Electric shock, fire
Risk of serious or fatal injury due to fire or
electric shock.
e
Never immerse the charger or plugs in water or
spray them directly with water (e.g. high-
pressure cleaning equipment or garden hoses).
e
Only clean the charger when the control unit has
been fully disconnected from the mains supply
and from the vehicle. Use a dry cloth for cleaning.
9Y0.012.003.A-EU.book Page 39
