32
Getting Started
DE
EN
FR
IT
ES
PT
NL
SV
FI
DA
NO
EL
CZ
HU
PL
HR
SR
SK
SL
ET
LT
LV
RO
BG
MK
Operating options
Fig. 8: Operating options
Getting Started
Configure the following settings before starting
to use the charger for the first time.
Language and Country
1.
Select the required language from the list.
Confirm selection.
2.
Select the required country from the list.
3.
Confirm the selected language and country.
Data Transmission
e
Read and confirm instructions for
transferring data.
Software Updates
In order to guarantee the full functionality and
reliable operation of the charger, the latest software
must always be installed.
e
Select and confirm settings for the automatic
software update.
On:
The charger checks whether software
updates are available and downloads them
automatically.
The installation can then be started directly
or postponed to a later time.
Off:
The charger checks whether software
updates are available and displays
a corresponding message. The download
can then be started manually.
Once the download is complete, the installation
can then be started directly or postponed
to a later time.
If an Internet connection with the charger cannot
be established, software updates can also
be downloaded manually via the web address
in the
E-Performance
area at
https://www.porsche.com and installed via
the web application.
Selecting a Network
Select the option for connecting to a home network.
This option can be skipped using
S
KIP
. In this case,
no connection to a home network is established.
If the charger is connected to an existing home
network, advanced functions and information are
available. The connection can be established via WiFi
or a Powerline Communication network
(PLC network).
If there is no home network available, a hotspot can
be set up on the charger.
Connection via WiFi
1.
Select
W
I
F
I
.
2.
Select the home network from the list of detected
WiFi networks.
3.
Enter and confirm your password.
Connection via PLC pairing button
1.
Select
PLC
PAIRING
BUTTON
.
2.
Start the connection process on the PLC modem.
Confirm by pressing
OK
on the charger.
Once the setup is connected, confirm with
C
ONNECT
.
The connection to the PLC network is active.
If a connection to the PLC network is established,
the
symbol will be displayed in the status bar.
Configure settings
A software update is available
A
Back
B
Up/Down
C
Activity
D
Details
E
Skip
Symbol
Meaning
Information
– Options marked
S
KIP
can be skipped. A setting
is not configured in this case.
– Settings can always be changed on the display
(
S
ETTINGS
).
9Y0.012.003.A-EU.book Page 32