5
Security
–
When installing a new electrical socket, select an
industrial electrical outlet with the highest pos-
sible power available (adapted to the domestic
electric installation) and have it put into opera-
tion by a qualified electrician.
–
Where technically possible and legally permissi-
ble, the electric installation must be dimensioned
in such a way that the maximum nominal power
of the electrical socket used is available for
charging the vehicle.
–
In order to make full use of the charger and to
ensure fast vehicle charging, use either NEMA
electrical sockets with the highest possible cur-
rent rating appropriate for the power plug or in-
dustrial electrical outlets to IEC 60309.
–
When charging the high-voltage battery via the
domestic/industrial electrical outlet, the electri-
cal installation may be loaded to its maximum
capacity.
Porsche recommends that you have electrical
installations used for charging checked regularly
by a qualified electrician. Ask a qualified electri-
cian which inspection intervals are appropriate
for your installation.
–
On delivery, the charging current is automatically
limited to prevent overheating of the electrical
installation. Have a qualified electrician bring the
charger into operation and set the charging cur-
rent limit as required for the domestic installa-
tion.
Refer to chapter "Limitation of charging cur-
Intended use
Charger with integrated control and protection for
mode 2 charging, for charging vehicles with high-
voltage batteries that meet the generally applicable
standards and directives for electric vehicles.
e
Always use the appropriate device version for the
local mains supply.
Refer to chapter "Technical Data" on page 28.
The charger may only be used as a combination of
supply cable, control panel and vehicle cable.
