A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
25
1.
Select
My Car
in the app's main area.
2.
Move down in the menu by swiping vertically
(
Charging details
).
3.
Activate
Toggle
.
The charging process is started immediately.
Information
The toggle for starting direct charging is only shown
in the app if active timers or profiles have been
created.
Managing and activating timers
To use the full range of functions in the app, the fol-
lowing requirements must be met:
b
b
Private mode is deactivated.
b
b
Remote access authorization granted in the
PCM.
>
Please see chapter "Installing & using" on page 3.
b
b
Sufficient battery charge (>10 %) (Climate
timer).
b
b
Charging equipment connected (E-Control).
Managing timers
This function can be used to manage the vehicle's
timer-controlled pre-cool/heat function or the
charging process for the high-voltage battery. The
vehicle attempts to establish the set climatic condi-
tions or the set battery charge for the set time. Up to
five timers (climate) can be configured and saved.
Information
The planned pre-cooling/heating of the vehicle us-
ing the timer is also performed when the vehicle plug
is not connected to the charge port.
1.
Select
My Car
in the app's main area.
2.
Navigate down by swiping downward.
3.
Select
Manage timer
e
Edit
.
4.
Edit the desired timer via
.
5.
Configure settings.
–
Repeat
: Timer operates on each selected
weekday at the same time. Otherwise the
set timer operates once at the desired time.
–
Pre-cool/heat
: Pre-cool/heat can be se-
lected for the charging operation.
The temperature from the
pre-cool/heat
timer is used.
6.
Select
Save
.
The set timer is activated and the vehicle is
charged at the desired time.
Activating timer
A pre-set timer can be activated. When a timer is
activated, the vehicle will be charged or pre-cooled/
heated by the programmed time.
b
b
Timer is set.
1.
Select
My Car
in the app's main area.
2.
Navigate down by swiping downward.
3.
Select
Manage timer
.
4.
Activate the timer via the checkbox.
The set timer is activated and the vehicle is
charged at the desired time.
Porsche Vehicle Tracking System (PVTS)
The functions of the Porsche Vehicle Tracking Sys-
tem (PVTS) can be remotely activated/deactivated
using the app.
The following special modes are available:
–
Service mode
: When the mode is activated, no
theft alarm is triggered if the vehicle is being
serviced (e.g. battery is disconnected).
–
Transport mode
: When the mode is activated, no
theft alarm is triggered if the vehicle is moved
with the ignition switched off (e.g. on a ferry).
NOTICE
Please use these functions carefully.
e
Activation of the special modes temporarily re-
stricts the security of your vehicle.
Information
For further information on the Porsche Vehicle
Tracking System (PVTS), please refer to the sepa-
rate Owner’s Manual.
Switching special mode on and off
b
b
Remote access authorization granted in the
PCM.
>
Please see chapter "Installing & using" on page 3.
b
b
Security code assigned in My Porsche.
>
Please see chapter "Installing & using" on page 3.
1.
In the Porsche Connect App, select
My Car
main area.
2.
Move down by swiping downwards (
Alarms and
Modes
).
Before activating, the security code assigned in My
Porsche must be entered.
