Lights, Turn Signals and Windshield Wipers
69
Switching on and off
(on vehicles WITH High Beam Assistant)
If the High Beam Assistant was deactivated or if
the requirements are not met, high beam can be
switched on and off manually.
The following conditions must be met:
– Darkness
– The light switch position
is selected.
f
Switching on
: Push the stalk twice to the front
pressure point
3
.
The indicator light
on the tachometer
lights up.
f
Switching off
: Push the stalk once to the rear
pressure point
4
.
Operating the headlight flasher
f
Push the stalk once to the rear pressure
point
4
.
The indicator light
on the tachometer
lights up briefly.
For information on High Beam Assistant:
f
Please see the chapter “HIGH BEAM
ASSISTANT” on page 67.
Parking light
The parking light can only be switched on when
the ignition is switched off.
f
Move the stalk up
2
or down
1
to switch on the
right or left parking light.
If the parking light is switched on, the message
“
Parking light on
” will appear on the multi-
function display in the instrument panel after the
ignition is switched off.
For information on warning messages on the multi-
function display:
f
Please see the chapter “OVERVIEW OF
WARNING AND INFORMATION MESSAGES”
on page 114.
Emergency Flasher
The emergency flasher can be switched on
regardless of the position of the ignition lock.
Switching on and off
f
Press the emergency flasher button on the
dashboard.
All turn signal lights and the indicator light in the
button flash when the button is operated.
If the emergency flasher remains active for longer
periods, the illumination phase of the flashing
interval is shortened to preserve the lights.
Other vehicles could collide with your vehicle if you
are parked in a dangerous position.
f
Whenever stalled or stopped for emergency
repairs, move the car well off the road. Switch
on the emergency flasher and mark the car
with road flares or other warning devices.
f
Do not remain in the car. Someone
approaching from the rear may not realize your
vehicle is stopped and cause a collision.
Exhaust fumes and the exhaust system are very
hot when the engine is running. The exhaust
system (including the tailpipe) remains hot for
some time after the vehicle is turned off.
f
Do not park or operate the vehicle in areas
where the hot exhaust system may come in
contact with dry grass, brush, fuel spill or
other flammable material.
The engine and surrounding components become
very hot when the engine is running.
f
Before working on any part in the engine
compartment, turn the engine off and let it cool
down sufficiently.
Emergency stopping
Hot exhaust system and
tailpipe
Engine heat danger
when working
DANGER
h
WARNING
h
WARNING
h
14_C7NF_21.book Seite 69 Mittwoch, 26. März 2014 12:15 12
