Porsche 9Y0.971.675.BE, Руководство пользователя

Страница: 76 / 1111

74
Information
If your device is in a home network, it can no lon-
ger access the Web Application via the hotspot IP
address (192.168.0.1), but only via the automatically
assigned IP address or the host name of the charger.
− Existing IP address entries:
− Web Application: Maintenance e Device in-
formation
− Charger: Settings e Networks e Net-
work information
− Existing host name entries:
−
Letter containing access data
−
Web Application: Maintenance
e
Device in-
formation
Information
If you change from hotspot mode to a WiFi network
connection or vice versa during the setup process,
you will need to log in again.
You can change to the home network with Powerline
Communication while a hotspot connection is active
without restarting.
Information
If you use the Web Application, only disable the hot-
spot connection if a connection to a home network is
possible.
e Select the desired network connection (hotspot,
WiFi, PowerLine Communication).
Hotspot
Your device can connect directly to the charger via its
integrated WiFi hotspot.
1. Select Configure hotspot .
2. In Settings, enter the network name and security
code of the hotspot.
e For information on establishing a hotspot con-
nection,
g Refer to chapter "Opening the web
application" on page 72..
WiFi
Information
If the charger is already connected to your device
via a hotspot, you cannot simultaneously establish a
connection to the WiFi network. You must disable the
hotspot first.
1. Enable WiFi.
2. Select option Connect to network .
3. Select your network from the list and enter the
Security code . Other network : Select this if you
are using a network that is not on the list.
4. Choose whether to have the IP address assigned
automatically (recommended).
🡆
The IP address appears once the connection
to the network is established.
The status
Connected appears by the net-
work on the list.
Managing WiFi networks
Option Explanation
Other network
e Select this if your
network is not on
the list.
Option Explanation
Manage known net-
works
e
Select Delete to
remove saved net-
works. This way,
the charger will be
in the correct net-
work.
Disconnecting from the network
1.
Select the network that is currently connected.
2. Select Disconnect to disconnect from the WiFi
network.
Configuring a network connection
1. Select the network that is currently connected.
2. Select Configure to change the settings to the
IPv4 address and the DNS server.
Information
A 2.4-GHz frequency band is used for the network
connection. In the event of connection problems,
disable the 5-GHz frequency band on the network
router.
PowerLine Communication
As an alternative to WiFi, your charger can be con-
nected to the home network via a PLC connection.
For this to happen, the existing mains supply is
used to set up a local network for data transfer. The
charger is registered as a client in the PLC network.
To establish a connection, the charger and PLC mo-
dem can be connected to one another via their pair-
ing buttons. In this case, the charger is automatically