Porsche 911 GT3 Cup MR Gen. II Скачать руководство пользователя страница 19

Страница: 19 / 120

Version V2, 08/2020

Porsche 911 GT3 Cup MR Gen.II

Home

EXHAUST SYSTEM & FUEL SYSTEM | Fuel System

3.4 Fuel System

Refuelling

►

The 911 GT3 Cup MR Gen.II is refuelled with the front cover closed. The standard top plate is ex-

panded with a tank tower and a three

flap safety lock. An additional rollover valve with increased air

flow is installed in the top plate in order to ensure quick and complete refuelling in all conditions. As
a result, the tank is vented quickly even during extreme conditions.

►

The three

flap safety lock is self

sealing and does not require an additional fuel cap.

►

Refuelling can be carried out using a fuel nozzle or suitable tank cans with a hose attachment.

3,5 Nm

20 Nm

NOTE

Fireproof clothing is strongly recommended for all work on the fuel

system (including refueling and defueling). Failure to observe can

result in serious injuries! Suitable fire extinguishers must be provided

for all work on the fuel system!

Please respect the information and technical information for the fuel

system in the manual for the 911GT3 Cup Gen.II provided by Porsche

Motorsport.

The fuel system, including the tank tower and its components, must

be checked for damage and leaks as part of vehicle maintenance.

Failure to do so can result in serious injury.

WARNING

ATTENTION

DANGER

Modifications to the three

flap safety lock are not permitted.

WARNING

Never refuel the vehicle with the engine running!

Always insert the nozzle into the three

flap safety lock as deep as

possible!

WARNING

Содержание 911 GT3 Cup MR Gen. II

























































































































Результаты поиска

Содержание 911 GT3 Cup MR Gen. II

Отзывы:

Бренды по названию

Популярные бренды

Porsche 911 GT3 Cup MR Gen. II, Техническое руководство

Результаты поиска

Содержание 911 GT3 Cup MR Gen. II

Отзывы:

Бренды по названию

Популярные бренды